R/O units

mr_alberta · #1 03-13-2006, 07:19 PM

How many GPD is your R/O unit rated for? Also, what is the temperature of the water? The colder the water, the less R/O you get in my experience.

Dad · #2 03-13-2006, 07:38 PM

Hi Harvey its a Aqua-safe 100 GPD ("RO+DI") SYSTEM 6 stage. I'am not sure of the water temperature will check that tonight, would you suggest mixing my source water with both hot and cold?
joe

DanG · #3 03-13-2006, 08:03 PM

Quote:

Originally Posted by Dad

Hi Harvey its a Aqua-safe 100 GPD ("RO+DI") SYSTEM 6 stage. I'am not sure of the water temperature will check that tonight, would you suggest mixing my source water with both hot and cold?
joe

BAD!!! No, that's a really easy way to kill your membrane. From what I've read, you can get 25 feet of the same tubing that connects from the water source to the in of the filter, coil it up and submerse it in a bucket that has a small heater in it keeping the water @ 78°f. That will help boost your production.

Bill · #4 03-13-2006, 08:39 PM

coil the cold ro tube and leave it in the sump...instant chiller

Bartman · #5 03-13-2006, 09:49 PM

Quote:

Originally Posted by DanG

BAD!!! No, that's a really easy way to kill your membrane. From what I've read, you can get 25 feet of the same tubing that connects from the water source to the in of the filter, coil it up and submerse it in a bucket that has a small heater in it keeping the water @ 78°f. That will help boost your production.

Just curious, why would warm tap water kill your membrane but warmed water through a coil would not?

mr_alberta · #6 03-13-2006, 09:59 PM

I think Dan is implying that there is more room for error (i.e. accidentally running only hot water to the unit) when hooking it up to the hot water line and killing your membrane.

Jason McK · #7 03-13-2006, 10:21 PM

you may also want to check the PSI the unit requires.

Also double check your connections and filters.

J

sergeantpilot · #8 03-13-2006, 10:36 PM

I've got a fairly new 100 gpd unit from Aquasafe and all I get is 30-35 gpd. Took forever to fill my tank initially. The 100 gpd is a myth to sell the unit IMO, unless someone else out there has made the unit go into top gear, I would like to know how. Just my 2 cents worth.

Bartman · #9 03-14-2006, 06:34 AM

Quote:

Originally Posted by mr_alberta

I think Dan is implying that there is more room for error (i.e. accidentally running only hot water to the unit) when hooking it up to the hot water line and killing your membrane.

I am just waiting to receive my Aquasafe unit and I ordered a faucet adapter. I understand that RO membrane capacity is rated at somewhere around 75F, not cold water temps. I was planning on running with the same temp water I use for my FW tanks (around 74F). Is this safe?

vanreefer · #10 03-14-2006, 06:54 AM

Quote:

Originally Posted by Bartman

Just curious, why would warm tap water kill your membrane but warmed water through a coil would not?

the warm water from the tap (hot water heater) could (usually does) contain heavy metals that leach out of the tank. I use warm water from the tap makes a huge difference in RODI water production