|
|
|
|
|
#1
03-08-2006, 07:14 PM
|
|||||
|
|||||
Wood must be cheaper in BC
 My 36x18 Hagen didn't have any support down the middle, just depends on the manufacturer and the thickness of the glass they use maybe? 
|
|
#2
03-08-2006, 07:36 PM
|
||||
|
||||
|
Perfecto tanks have the supports.
HomeDepot or Rona's have 2 by 4s for very cheap around here (Lower Mainland). I figure a stand 3' by 3' by 18" wide would need 2@12' & 1@8' or 4@8'. I usually buy a scrap piece of plywood from them as well to put on top of the stand. Like I said, I've built 2 3' stands for about $30 each & 2 2' stands for about $20 & 2 6'+ stands for about $80 each. Now if I wanted to make them pretty & add doors, etc, then it would be a whole lot more expensive.
|
|
#3
03-08-2006, 07:44 PM
|
|||||
|
|||||
|
I would add in a piece of the pink styrofoam between the tank and the stand.
|
Hybrid Mode
