How big can I go while keeping the same light?

digital-audiophile · #1 03-07-2006, 05:44 PM

Scott, talk to Dennis when you decide what size you want. I think they are backed up a bit in tank building though. (We were talking to Albert about tanks the other week)

TheReefGeek · #2 03-07-2006, 08:32 PM

If you are doing this primarily for fish, I would suggest a longer tank, because your fish will be much happier with more swimming length before having to turn around. Say a 4 footer. Then Put your HQI in the middle, and have a large rock pile in the middle with your SPS corals on it, right under the MH.

Then just run cheap fluorescents over the rest of the tank, like a FOWLR. This way you only have to spend a little cash on some strip lites, and you will utilize your MH for your light demanding corals in the middle of the tank.

This would be a good setup for future expansion too, you could add a second MH bulb anytime, and make the fluorescents actinics.

But it depends on how much room you have, maybe you dont have 4 feet of space. Just an idea for you.

StirCrazy · #3 03-07-2006, 11:22 PM

size wise you could do 24" x 24" with a 150 HQI but max depth I would go with that bulb is 18"

Steve

OCDP · #4 03-08-2006, 03:03 PM

Okay, perhaps scratch the cube idea .... grr. I am being informed that angels need lots of swimming space (which I didn't know) .. so I am being advised to do a longer tank. I'm having a hard time figuring out what to do here... size is an issue. Length wouldn't be good for two reasons A) I have a modded PVC light fixture made that is only as wide as my 20g tank stand. And B) I don't really have that much space in my bedroom.

Now.. I do want to make the tank more suitable for the Flame... but I just don't know what to do. I'm pretty confused, I am very unfamiliar with tank dimensions and sizes.. I really just want something pretty basic and standard, I'm not too picky. I just need to make the tank a little longer now to make more swimming room for the Flame..

I need some help! haha, thank you.

Scott

TheReefGeek · #5 03-08-2006, 03:19 PM

Do you have any pictures of this modded light fixture, maybe we can figure out how to mod it again to fit a different tank.

If you want to upgrade your lighting let me know, I have various size used fixtures and MH and fluorescent setups right now.

OCDP · #6 03-08-2006, 03:25 PM

Can't have anything hanging from my ceiling unfortunately, hence why I have the PVC mod built.

Hah, of course someone asks me to post a picture of the mod just after I delete all my old photos on my photobucket account . Haha... this is the only thing I have that can show you somewhat what it looks like. It comes off the ground , straight up, then the flood lamp is in the middle.. it's pretty basic.

(you can see the PVC on the sides coming up... its not too hard to picture the rest.)

Perhaps I could just make the PVC longer.. but in turn that makes it heavier in the middle, which would eventually lead to a bend in the PVC wouldn't it? Also, the coverage is going to be pretty crappy with this flood lamp mod over a long tank.. I think it will anyways.

TheReefGeek · #7 03-08-2006, 03:34 PM

Looks like you used 1/2" pvc for this PVC light stand, if you want to use the same method but bigger, go with 3/4" or 1" for added strength.

Or use wood, pine shelving is nice, and pretty cheap as far as wood goes.

The 3ft fixture I used on my 50g could also sit on the tank instead of hanging.

Take some time to think about what tank you can fit into the space you have, then once you have the dimensions of the tank we can give more specific advice. I think a shallow 3ft tank with the HQI in the middle would work, if the edges (6" on each side or so) are a bit dark for your liking, you could add some NO fluorescents for cheap just to make it look more even. You can buy the ballast, endcaps, etc cheap for NO at any lighting supply company.

mr_alberta · #8 03-08-2006, 03:20 PM

Do a 24x24x20 cube-ish tank for now and use less rock. That'll give the angel more swimming room for the time being.

OCDP · #9 03-08-2006, 04:03 PM

Quote:

Originally Posted by mr_alberta

Do a 24x24x20 cube-ish tank for now and use less rock. That'll give the angel more swimming room for the time being.

I like this idea... obviously because a cube is what I want... and have wanted one for a while now. If I did just a big island in the middle and left the sides alone it would have fairly good swimming space.. and if I were to make caves and other various hiding spots, etc... what do you guys think?

I realize I've walked into this a little unprepared, tonight I will take measurements of what kind of space I have to work with, although I know it wont be too much... again, why a cube would be better for me.

Sorry.. haha guess it's logic to find out what kind of space I have to work with haha

TheReefGeek · #10 03-08-2006, 04:20 PM

You should be good with the 24x24x20 for the flame, that is a 50g tank, same total volume as my 3ft I had my coral beauty in, just different shape.

Leave room on all sides, and build some arches to pass through the middle if you can, and the flame will do well.