|
|
|
|
|
#1
03-06-2006, 05:01 PM
|
|||||
|
|||||
I think Pond Pro is a Danner Magdrive pump isn't it?
__________________
32"x32"x20" Cube-ish tank 
|
|
#2
03-06-2006, 06:23 PM
|
|||||
|
|||||
|
I have a little giant 5 series pumping water from my sump in the basement to the upstairs. It is extremely noisy and I wouldn't recommend it to anyone. I does however have a lot of power as I must have about 13 vertical feet of head and the pump still produces 750gph. Since it only produces 1100gph with 0' head that isn't much loss. I believe that the reason it is so noisy is because of the cooling fan and the high pressure it runs at.
__________________
Brennan
|
|
#3
03-09-2006, 10:48 PM
|
|||||
|
|||||
|
which LG 5 series do you have? I was using the 5.5TE 1/2HP for my set up wich is very similar to yours and I was getting around 1800 GPH @11' head. I stopped using it as it was consuming over 5 amps and was quite noisy.
__________________
Visit my Gallery http://www.canreef.com/photopost/sho...user=2209&sl=b 150 Gal Deep Dimension Cube, with Model 2 sump/filter, CO2 reactor, milwakee pH controller, auto-top off, 2 radion LED lighting, Vortech MP40 cor internal circulation.
|
|
#4
03-10-2006, 04:53 AM
|
||||
|
||||
|
bummer i have the following pumps
4 MDQX - SC 1325 gal/hr te 5.5 MD - sc 2100gal/hr te 7 - MD - HC 3180 gal/hr i was hoping u guys would say good things about them. http://www.lgpc.com/MagDrive/ByCateg...&CategoryID=19 Richard
|
|
#5
03-10-2006, 07:19 PM
|
||||
|
||||
|
Quote:
(although, I should have drilled my sump and ran an exterior pump so that I wouldn't have the water level so high to accomodate the submersible, but hey, I'm learning)
__________________
This all started with a ten gallon and two clowns.
|
Hybrid Mode
