![]() |
#1
|
|||||
|
|||||
![]() The plastic hose clamp failed on the pump in the preskimmer last night (about 1am I do believe). Shot water up & out. After Not getting electrocuted (thank goodness) & cleaning up the water (hardwood floor) we put a stainless steel hose clamp on. Anyone have any thoughts? Is this ok? Will it do till we can get better plastic clamps? Will it cause any problems?
|
#2
|
|||||
|
|||||
![]() I would think it will last for a very, very long time. Especially so if you don't allow it to come in contact with SW. I use a number of them and they are two years old and don't show any sign of wearing out.
|
#3
|
|||||
|
|||||
![]() i have used ss clamps for years with no problems. i have changed a few out that are right over the sump as they tend to seize up after awhile but no biggy.
__________________
Given sufficient thrust pigs will fly just fine. 90 Gallon LPS tank - Challice, Acans, Favia, Diplo and Zoos 125 Gallon SPS Coming Soon! |
#4
|
|||||
|
|||||
![]() It is touching sw. Thats why I wondered. Hope its OK till I can find plastic clips!
|
#5
|
|||||
|
|||||
![]() you can get the plastic clamps at OA...I think JL has them too. Most SS clamps are not 100% stainess...the gear is not.
__________________
180g tank(6x2x2) w/170lbs LR, 2-250W 1-400W Halides, 2-3ft t5 Actinics,H&S 1260 200 Skimmer, 1-Tunze 6000stream w/controller, 1-6060stream, 70g sump, 30g refugium Neptune controller, Sequence Hammerhead inline return, Lifeguard 25W UV, 1-Tunze osmolator, 1-Tunze wavebox, 1/4Hp Pacific Coast chiller, MarineTech calcium reactor |
#6
|
||||
|
||||
![]() Like Mike said, most SS hose clamps are not 100%. I special ordered some that were 100% SS and used them in my sump for a while. After about 6-8 months they started to rust so I assume they were not the right grade of stainless. Didn't cause any problems that I could see though, and I removed them and used Zip Ties with a zip tie tightener which worked great. A few days until you can get replacements will be fine.
__________________
Marcel How was I to know that Salt was an addictive drug? |
#7
|
|||||
|
|||||
![]() the tipical SS hose clamp is good for fresh water but will still rust in salt water as they have to use a different ss aloy to keep it maluable so it doesn't get brittle and brake from bending around stuff. I would stick with plastic if you can.
now if this clamp is outside the tank and not submerged then goahead and get a SS hose clamp from canadian tire. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#8
|
|||||
|
|||||
![]() zap straps
![]()
__________________
http://www.canreef.com/ftotm/sept05/index.php |
#9
|
|||||
|
|||||
![]() Steve is right. Pretty much any SS item will rust with direct exposure to salt water - taking oxygen out of the water in the process. IMO it should only be used for a quick fix.
|