Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 02-21-2006, 04:08 AM
TheReefGeek's Avatar
TheReefGeek TheReefGeek is offline
Member
 
Join Date: Jan 2006
Location: Edmonton, Alberta
Posts: 1,503
TheReefGeek is on a distinguished road
Default

The Berlin is a good skimmer, just not for over 100g.

For a 170 with a sump, depends on the size of a sump, the G4 plus is probably your best bang for your buck. But you might want to go bigger for if you want to upgrade down the road.
__________________
Rory

Reply With Quote
  #2  
Old 02-21-2006, 06:24 AM
richtg's Avatar
richtg richtg is offline
Member
 
Join Date: May 2004
Location: Calgary
Posts: 123
richtg is on a distinguished road
Default

Love my ASM G3. It easily handles my 120 gal of water. I set mine up in a constant-level first stage of sump. Never have to adjust. Had for 1 1/2 years.
__________________
90gal Starfire mixed reef, 400W MH (Giesemann 13K megachrome/Icecap E-ballast), (2) 54W T5 Giesemann true actinic, 45gal sump (65W 50/50 PC), ASM G-3 Skimmer, Mak 4 return, Sequence Dart closed loop, foam backdrop, 120 lbs LR, 2" sandbed, & 1 dillhole running the show.
Reply With Quote
  #3  
Old 02-21-2006, 06:45 AM
Myanth Myanth is offline
Member
 
Join Date: Jan 2006
Location: Edmonton
Posts: 119
Myanth is on a distinguished road
Default

Is the water level in the sump really important for setting up a skimmer. I would imagine that it is due to pressure changes with water levels. The reason I ask is that I have a Red Sea Berlin that has needed constant maintenance since I set it up. I have downloaded the owners manual and it basically explains all of the "tweeking" necessary to effectively run one of these, but is seems like a real PITA. It skims lots but I always have to adjust water flow and air flow just to keep it going and keep it from flooding. Am I doing something wrong?

My remora is so nice in comparison. If I want wet skimmate I lower the cup, dry skimmate I raise it up. Simple.

Mike
__________________
This all started with a ten gallon and two clowns.
Reply With Quote
  #4  
Old 02-21-2006, 02:22 PM
TheReefGeek's Avatar
TheReefGeek TheReefGeek is offline
Member
 
Join Date: Jan 2006
Location: Edmonton, Alberta
Posts: 1,503
TheReefGeek is on a distinguished road
Default

I assume you got my old Berlin up and running. When I had it up and running the skimate stayed constant when I ran it in 8" of water (the manufactuers recommendation) and I had the "throttle" on the pump at about 3/4, and the airline barely pinched.

When a skimmer is added to a system it takes a couple weeks to break in and settle down. You also have to watch what you add to your reef in terms of additives, some will make any skimmer go nutz and overflow, so you have to shut down the skimmer for a while.
__________________
Rory

Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 07:27 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.