|
|
|
|
|
#1
02-17-2006, 02:48 PM
|
|||||
|
|||||
Wouldnt the mod to the collection cup be pretty much the same for every skimmer?
Drill a hole in it, bulkhead it, run a tube into a sealed 5g bucket. Make sure the bulkhead is lower than the drain back into the skimmer. You can also tap it and use a screw in fitting instead of a bulkhead. 
|
|
#2
02-18-2006, 12:11 AM
|
|||||
|
|||||
|
It is the same except that the skimmer already has a hole in it with a sort of L shape that then feeds back into the skimmer body when it get's too full. I know on my remora pro I had it overflow a couple of times and it just slooshed out the top of the cup. With the Deltec as soon as it gets to a certain level it just runs through the acrylic tube and back into the skimmer instead of coming out the top. What I have to do is cut this piece off and fit an street 90 over it and run it out to a collection bucket.
Not that big a deal really and if I keep an eye on the collection cup and empty it don't have to worry about it.
|
Hybrid Mode
