|
|
|
|
|
#2
02-10-2006, 01:57 AM
|
||||
|
||||
Black acrylic
Hi RobbAdams,
I have black acrylic 1/8”, I can trade for LPS or if you do not have any I can even spare some for you, how big chunk do you need let me know.
__________________
------------------------ Arek 
|
|
#3
02-10-2006, 02:50 PM
|
||||
|
||||
I've used two different manufacturers blades, purchased locally, which have worked very well for me. The better one I can't remember the name ( Tman1973 ownes it now.) The one I'm using currently is made by Royse I believe. They are a bit pricey but not in the long run after inexpensive resharpening, time and material saved with better cuts. Probably not worth while if you are planning on using a cheap table top portable style saw though.
some other sample acrylic blades, http://www.abbeon.com/adf04/rvblades.html http://www.carbide.com/catalog/CTSB_...=AMA%2DLB10801 General saw blade selection tips, http://www.generalsaw.com/resource/plasticblade.html Here's a really good router bit from Onsrud with a flush trim bearing if you are into that, http://www.onsrud.com/Products.asp?A...8%3A46%3A15+AM Last edited by kari; 02-10-2006 at 02:54 PM.
|
|
#4
02-10-2006, 11:12 PM
|
||||
|
||||
|
Black acrylic
Hi RobbAdams,
Brother you need such small chunk so don’t worry, it’s yours for free. Small pieces witch I can offer are: 10 ½ X24 ¼ ,14X24 ¼ ,10 3/4X49 you can choose whichever you like. Call me 605-7857 any time
__________________
------------------------ Arek
|
|
#5
02-12-2006, 06:43 PM
|
|||||
|
|||||
|
Your other option is to get the acrylic shop to cut everything to spec for you. I did that at industrial for my nano refugium and it worked great. I assembled things myself but I'm sure they could do that too if you wanted.
I chose to have them cut to spec because it was cheaper than buying the tool and bits needed to cut things myself. good luck and look forward to seeing the finished project
|
Hybrid Mode
