![]() |
|
|
|
#1
|
|||||
|
|||||
|
thats pretty high but not disastorious. you might want to do a water change and keep an eye on stuff. some of your corals will probably close up as thats a prety big shift in change for one day. depending on your depletion rate your levels might stay like that for awhile unless you change some water out.
__________________
Given sufficient thrust pigs will fly just fine. 90 Gallon LPS tank - Challice, Acans, Favia, Diplo and Zoos 125 Gallon SPS Coming Soon! |
|
#2
|
|||||
|
|||||
|
You might find that those levels are balanced with each other, I just can't seam to find that calculator on RC. I'd still bring down the Alk, inverts don't like it that high. I agree that you CA isn't as detrimental but if your Mg isn't balanced your corals won't utilize the Ca.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
|
#3
|
||||
|
||||
|
Well, I just checked this morning, and everything was "still" alive (sigh).
What are the disadvantages of having this happen? If everything is open and happy latter today, can I just leave it as is? I also read somewhere that your aragonite sand will harden if your calcium is very high... well is this the case? Let me know please. I will probably be doing a water change today or tomorrow, just in case. Thanks |
|
#4
|
|||||
|
|||||
|
Quote:
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
|
#5
|
|||||
|
|||||
|
Fresh,
I would do at least a 30% water change. Won't bring alk down a heck of a lot, but it will get it closer to what you really need. BTW, what is your pH? Also, there is an article in the Reef Chemistry sticky thread that might have an answer for you .... Solving Calcium and Alkalinity Problems: http://www.advancedaquarist.com/issues/nov2002/chem.htm |
|
#6
|
|||||
|
|||||
|
Bev, do you know where the link is for that calculator for these levels?
Incidently.... What processes inhibit continued precipitation of CaCO3 onto a growing crystal? The main thing happening in normal seawater is likely the impact of magnesium. It does two critical things (discussed in detail in this linked article):
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
|
#7
|
||||
|
||||
|
Danny, the link doesn't work, and I really do want to read it
![]() So from what you said, I understand that if I have enough Magnesium in my system (elevated levels in this case of all ca/alk/mg), then I don't need to worry about the sand calcifying! Is that true? thanks |
|
#8
|
|||||
|
|||||
|
Quote:
The calculator and other articles are in the second thread of this (Reef) forum. Can't miss it. Says "Bev's Chemistry Links" |