Bulkhead put in backwards?

[StirCrazy]

works fine, just remember gasket always goes on the bulkhead side in or out (sorry had a blond moment), and add a film of silicone to all the parts befor you assemble it for added insuranced.

Steve

[Snoop Dog]

Gaskets go on the outside, not inside?...... good thing you let me know!

[Jason McK]

Gasket always goes on the wet side.

J

[muck]

You are both half right..the Gasket goes on either side depending which way you choose to put the bulkhead it.
If the threaded part is out the gasket is on the inside. If the threaded part is in the gasket is on the outside.
Basically push the gasket onto the bulkhead and then install which ever way you want.

[Snoop Dog]

Muck, is what J syaing correct, gasket is on the wet side, no matter which way the thread is pointing?

[muck]

Originally Posted by Snoop Dog

Muck, is what J syaing correct, gasket is on the wet side, no matter which way the thread is pointing?

If the threads are pointing to the inside of the tank the gasket goes on the outside of the glass.

If the threads are pointing outside of the tank the gasket goes on the inside of the glass.

The gasket always has to be against the flat part of the bulkhead itself.

[BMW Rider]

Originally Posted by muck

If the threads are pointing to the inside of the tank the gasket goes on the outside of the glass.

If the threads are pointing outside of the tank the gasket goes on the inside of the glass.

The gasket always has to be against the flat part of the bulkhead itself.

!00% correct. The gasket will only seal properly if sandwiched between the bulkhead flange and the glass/acrylic. If you put the gasket on the side with the nut, the water can seep past the threads. It does not matter that the gasket inside or outside as long as it is against the bulkhead flange. Never never never on the side with the nut.

[StirCrazy]

hang on here

Steve

[StirCrazy]

Originally Posted by Snoop Dog

Gaskets go on the outside, not inside?...... good thing you let me know!

forget that I screwed up... had to double check mine.. they go on either side depending on the set up, but always on the non thread side of the bulkhead.

Steve