|
|
|
|
|
#1
12-07-2005, 08:40 AM
|
||||
|
||||
noise and flushing
Just an idea, but it worked for me.
Remove the end cap and crank up the flow untill the durso starts to flush, then back off a bit. Then cover the top progressively untill it starts to gurgle and flush..ie to little air. Use this measurement to estimate hole size. ..mine is just over 3/8 in. Good luck
__________________
John its all about quality, not quantity..... ...when in doubt buy a Binford.... 
|
Hybrid Mode
