![]() |
|
View Poll Results: Do you have a grounding probe in your tank? | |||
Yes |
![]() ![]() ![]() ![]() |
16 | 31.37% |
No |
![]() ![]() ![]() ![]() |
35 | 68.63% |
Voters: 51. You may not vote on this poll |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() well?
![]()
__________________
a tout le monde, a tous les amis. je vous aime, je dois partir. |
#2
|
|||||
|
|||||
![]() just my arm
|
#3
|
|||||
|
|||||
![]() I'm surprised at the results, but I live with a master electrician.
![]()
__________________
http://www.canreef.com/ftotm/sept05/index.php |
#4
|
|||||
|
|||||
![]() For the few $$$ it is worth the safety factor, also anyone without a GFIC plug or breaker should re think
__________________
http://www.globalreefers.com/ |
#5
|
|||||
|
|||||
![]() Just buy a BIG copper grounding rod and tie to to a pipe..
![]() j/k Dont do that you will kill everything in your tank.
__________________
"what do you mean you need another tank??" |
#6
|
|||||
|
|||||
![]() i am just setting up a tank and i am wondering does a gfci recepticle and a gfci breaker do the same thing but the breaker covers all the plugs and a recepticle only covers those after the recepticle? i tried to install the recepticle one but i opened it and there are 3 positive negatives and 3 grounds and it says not to install if this is the case (call electrician ) but can i just change out the breaker with a gfci??
sorry i know nothing about electricity ![]() |
#7
|
|||||
|
|||||
![]() Yes, a GFI breaker and receptacle do the same thing, main difference is cost (breaker $80 / recpt $15).
A breaker will protect everything hooked to it, a recptl only itself and what's hooked up down stream. Not sure what you mean with the positive/negative. If it's a duplex receptacle, there should be a ground, a brass and sliver screw to hook to supply (black-hot, silver-neutral) and a other set of brass/silver screws for loads down stream. |
#8
|
|||||
|
|||||
![]() in the instructions it says there should be a line and a load but there is another cord in there and it says if there is more than just line and load call an electrician to install it. for 80 bucks i really could care less due to the money invested inb this already lol can i install the breaker my self or is there laws saying i have to get an electrician in
thanks scott |
#9
|
||||
|
||||
![]() For the money and the hassel it could easily cause without it. In my opinion, it is in the need to have it category.
|
#10
|
|||||
|
|||||
![]() the flipside of a gfi is that if it trips and your away from the tank it will stay off.
|