![]() |
#11
|
||||
|
||||
![]() I would get a mix of LR. I especially like a little bit of Tonga branching LR to help make arches & bridges within the rockwork. When I aquascape my reef tank, I set a few larger pieces on the bottom to act as a solid foundation & then I wedge in the other smaller/longer pieces to help form caves & caverns for my fish to swim through. I also try to add some flatter pieces to give me shelves for putting my corals on.
Aquascaping is really in the eye of the beholder & what one person likes may not be what looks nice to you. By having an "open" structure like described above, it also gives the anemone many choices as to where it wants to plant its foot & stick its "head" out. It also allows you to get higher up towards the light without overloading the tank with too much LR. Is the tank 3' or 4" long? Keeping an anemone happy will usually require MH lighting & trying to save money by buying cheaper lighting will end up costing you in the future when you almost inevitably upgrade (speaking frim experience here ![]() Having a sump is good because it gives you more choices when it comes to skimmers. Others can give you more recommendations about skimmers but I'm happy with my (HOB) Remora Pro & (non-HOB) Tunze. Remember that most manufacturers waaay over exaggerate the capacity of their skimmers, especially Prisms/Prism Pros & SeaClones. A pair of Cleaner/Peppermint/Fire shrimp & some snails are almost always good tankmates for clowns. For hermits, I find blue-legged & neon blue-legged are the best. Yellow watchman gobies, clown gobies, lawn mower blennies, and other small hardy bottom-dwellers add some extra life & interest to a tank. A pair of Bangaii cardinals (males have longer dorsal fins) or a trio of Chromis can help add movement & colour to the mid-water region. BTW, clowns do not need anemones to survive. It is great to witness the symbiotic relationship, but anemones are not the easiest to keep alive in captivity, I have found clowns hosting in colts, rhodactis mushrooms, finger leathers & toadstool corals, all of which are hardier & require less light. If you go this route, 96w PCs or VHO lighting would be fine. However, if you like high light requiring corals/clams, then definitely invest in the MH system. Hope you had fun reading this essay ![]() Anthony |
#12
|
|||||
|
|||||
![]() No, Anthony, the essay was just fine. Good suggestions, and basically what I was looking for. By a "perc tank", I mean that the main focus is to have a tank that houses a pair of percs, but I am looking to "fill" it (as it were) with a good variety of other lifeforms to give the most appealing tank I can.
I'm well-versed in cichlids, so I have also gone the cheapie to expensive route before. I wasn't originally thinking of an anemone, and I think I will pass on the lighting as well for now. It's my first saltwater, so if I decide to jump into corals and such later on, I will make the expense then. I still have a heavy FW habit to keep going. Here's a picture of the tank.... ![]() |
#13
|
|||||
|
|||||
![]() Wow.. nice tank. I need a bowfront
![]() It's going to look real nice all setup... I like the stand a lot as well ![]()
__________________
20g BB Mixed Reef // Coralife 150w HQI // AquaC Nano // Koralia 1 & Seio 820 // Jager 200w // AC50 |
#14
|
|||||
|
|||||
![]() One of Rob's stands....seems to be a popular piece of work, judging from the responses here...
http://albertaaquatica.com/index.php...=4097&st=0&hl= |
#15
|
|||||
|
|||||
![]() Wow, another awsome stand by Rob at Majestic. I'm kind of wondering why I sold the tank now.
![]() I had about 60-70 lbs of LR in the tank when I had it and it filled up pretty good with that much. I kind of stacked it up high in the back corner and along the sides and left the middle open. Do you have the spray bar thing I used for the return? It will help with the flow in the back of the tank. What kind of lights did you have in mind for it?
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#16
|
|||||
|
|||||
![]() I do have the spray bar and will be using it. As for lights, I'm not sure right now. I'm just planning to do FOWLR right now.
What did you have in it for lights? I assume they are still the same, an Aqua-Glo and a Marine Glow I think? |
#17
|
|||||
|
|||||
![]() Yes, those are the bulbs I used originally, but not while I had the reef going. I stuffed a dual 65watt PC and a 250 watt MH over it when the reef was going.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#18
|
|||||
|
|||||
![]() If I decide to do corals, I'll invest in the money then. For now, I'm just going to stick with the original lighting.
![]() |
#19
|
|||||
|
|||||
![]() Quote:
__________________
M2CW |
#20
|
|||||
|
|||||
![]() Quote:
|