![]() |
#1
|
|||||
|
|||||
![]() I put the regulator and needle valve together back before CO2 equipment became more widely available in Canada...
CO2 tank is your standard 5lbs aluminum tank available at OxyPro. Refills cost ~10 bucks... all they do is take your tank and give you a filled one. Takes about 5 minutes for an exchange ![]() Regulator is dual gauged and made of brass. The output guage is made to measure pressure in the lower ranges ~20psi. Needle valve is attached to the guage. I got that valve from Swagelok for ~50 bucks ![]() ![]() $75 OBO for tank. $50 OBO for regulator and needle valve. $110 for both. Thanks for looking! -Rich |
#2
|
|||||
|
|||||
![]() Pm'd, I'll take both.
|
#3
|
|||||
|
|||||
![]() No PM received?
![]() -Rich |
#4
|
|||||
|
|||||
![]() dam and rus is on holidays
__________________
36x18x20 (50gal) tek 6x39watt t5,s. 2x 6025 tunze. euro-reef rs100. no more school so i,ll be able to keep this one! http://www.canreef.com/vbulletin/showthread.php?t=61329 |
#5
|
|||||
|
|||||
![]() PM'd again, still want them.
MP |
#6
|
|||||
|
|||||
![]() Spoken for.
Thanks for the interest! -Rich |