![]() |
|
#1
|
||||
|
||||
![]() So the new lights have been up for a while...my corals are happy and growing. Maybe not as fast as I like because I've had trouble with getting Alk and CA right. The lights are not turned up yet with the highest channel reaching 60% during peak hours.
![]() ![]() ![]()
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#2
|
||||
|
||||
![]() Thought I would update the tread with a few pics on how my tank is progressing. The lights are working well and corals continue to grow and color up. I ran out of room so I added some new rock as you can see by the color difference.
![]() ![]()
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#3
|
|||||
|
|||||
![]() Looks great!
I spy some new rocks!
__________________
- S H A O - |
#4
|
|||||
|
|||||
![]() Sorry if this info is posted somewhere and I just overlooked it (I did try to look but came up empty), what lights are these new ones? Thanks!
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#5
|
||||
|
||||
![]() I installed new Mirage x200 lights from LedZeal. I got to design the setup and spectrums. They are fully controllable with four channels. All in, including shipping was less than one radion.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#6
|
|||||
|
|||||
![]() cool.
would you think 3 of those would light a 96" x 36w x 24h? and what changes did you make from the default set up and why?
__________________
- S H A O - |
#7
|
||||
|
||||
![]() I would say that you would be better to go with more of them. I have them straight up the center and my tank is 84"L x 28"w x 26"D and as my corals grow large I imagine I will need to add a strip (maybe orphek) or t5 up the sides. In your situation I would say to look at 4 of them set diagonally which would cover the extra width and the length. An extra slave unit was about $235USD. They are also introducing the new X300 which is 36"long and more wattage. I don't know pricing.
As for my changes, I felt the original was a little too windex like. They now have a pre-made "super blue" option which has been popular and it mirrors the Radion G5 blue for look. I have attached what I did in this pic. In hindsight I think I would replace the reds with two Royal Blue as I get enough red in my low K whites. ![]()
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#8
|
|||||
|
|||||
![]() Hey,
It's been a couple months, any more thoughts on the new lights? Is your layout the same as the "G5" premade, or how is yours different?
__________________
- S H A O - |
#9
|
||||
|
||||
![]() Sorry I didn't see this. I'm still loving my lights. I have added some Orphek OR3 bars to each side to angle in so that some areas that might be shaded otherwise from coral will get some light.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |