|
|
|
#15
12-24-2004, 05:24 PM
|
|||||
|
|||||
On my current injector housing the input is 1". I think my previous injector housing had a 3/4" input but I used a 3/4" to 1" hose barb adaptor so I could still use the 1" hose.
If it's easy to swap the bits over to make it 3/4" or even 1" then I would probably do so. If you want to experiment and leave it as-is and try it, I would guess that although the smaller input would be somewhat restrictive, it would be not as restrictive as having the smaller diameter hose down all the way to the pump.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! 
|
Threaded Mode
