![]() |
|
#1
|
|||||
|
|||||
![]() Rearranged sump. Changed to a Sock Filter instead of floss in media chamber of sump. Changed to a smaller CoralBox Reactor instead of the oversized Aquamaxx to save room. Added a second Feit PAR grow bulb and discontinued the CAT light for the time being. Added a tray to keep Chaeto closer to the lights. Still need to make a proper sized stand for the skimmer so I can move the reactor into the same chamber....for now its with the return pump.
![]() |
#2
|
|||||
|
|||||
![]() I am really digging this build. Thanks for sharing.
|
#3
|
|||||
|
|||||
![]() With this tank I am going to attempt to severely cut water changes with a combination of strategies using Chaeto, GFO and NO3:PO4-X to control nitrates and phosphates. These will be put in place and tuned as needed. I will be dosing Trace Elements with Red Sea Coral Colors.
I needed to figure out how much trace elements to dose. I use Reef Crest 2 Part System so I though I'd come up with a number to easily work this out for myself and anybody else who may use Reef Crest and be interested in using RedSea Coral Colors. So far this is what I have come up with. If you see anything wrong with my math, let me know! ---------------------------------------------------------------------------------------- The instructions on the RedSea containers say use 1mL of additive for every 20ppm Calcium added per 100L when using 3rd party products. First off, I got a number of http://reef.diesyst.com Reef Calculator that ~0.0139g of Calcium Chloride to increase 1 gallon of water by 1ppm. A bag of Reef Crest Part A Calcium contains 400g of Calcium Chloride. This is mixed into 1 gallon of water which is equal to 3785.41mL So 3785.41mL / 400g is a ratio of 9.463mL:1g RedSea instructions are in Litres so converted 100L to 26.4172 gallons 26.4172 Gallons * 20ppm = 528.34ppm if the volume was of water is 1 gallon. 528.34ppm * 0.00139g = 7.34g of Calcium Chloride used to raise ~26 gallons/100L by 20ppm 9.463mL * 7.34g = 69.5mL of mixture Reef Crest Part A Calcium Solution Therefore if my calculations are correct, for every 69.5mL of Calcium dosed, you must add 1mL of the RedSea Coral Coral Additives when using the Reef Crest 2 Part System. ---------------------------------------------------------------------------------------- |
#4
|
|||||
|
|||||
![]() Ooh I just bought the Red Sea trace elements on Black Friday but haven’t started yet (mostly because I was too lazy to figure it out). I’m sure your math is better than mine.
|
#5
|
|||||
|
|||||
![]() Ugh...was interested in the Red Sea coral colours however my math is no where near yours to figure this out. I also use the reefcrest 2 part! Following along.
__________________
300g Basement Reef - April 2018 |
#6
|
|||||
|
|||||
![]() Added a Tyree Toadstool I got from a fellow reefer. Polyps came out after day of moodiness.
![]() |
#7
|
|||||
|
|||||
![]() Changed return. Removed some Loc-line and put outlet directly into water. Planning to make a screen lid so this will be easier to work with. Looks cleaner in my opinion as well.
![]() |