![]() |
|
#1
|
|||||
|
|||||
![]() You don’t want too much turnover in your sump. The larger pump is great if you have extensive horizontal and vertical runs.
__________________
300g Basement Reef - April 2018 |
#2
|
||||
|
||||
![]() I have a150g sump now & will turn my 180g into my sump. Over 2/3 will be refugium running Triton system. Shooting for 5 times the display turnover. Think it best not to max out a motors rated capability. I like the flexibility of being able to ramp up the flow rate to be able deep clean my tank & remove suspended particles.
. |
#3
|
||||
|
||||
![]() I am away from my tank usually between 10 days possibly a few months this winter & by running two pumps at 50%then if one goes then I can bump up the other to 100%.
Until I can get home or have someone that I deem capable of swapping out my pump. I find larger motors to make less noise at 50% then being maxed out. Will be close to 11 feet of head presser. |
#4
|
||||
|
||||
![]() I also think having an oversized pump running at slower speeds will reduce heat of its components making it last longer. Just my thoughts I could be totally wrong though.
|
#5
|
|||||
|
|||||
![]() That seems to be best practice, running a pump at less than full output.
__________________
- S H A O - |