DKoKoMAN’s 305g Basement Reef

[DKoKoMan]

Originally Posted by lastlight

Sorry to hear of your tank-moving woes. I'm picking my tank up tomorrow and I've got a sick feeling about it already. As for cutting that pane out I would use the smallest guitar string. use a blade to make a hole or just push it through. Then saw up and down with the string. I cut apart my 400g this way and that had inner eurobraces in the bottom. Would have been nearly impossible without the guitar string!

That’s a pretty good idea! I know they use wire to cut pvc so that would definitely work. My goal is to try and get the bottom panel out without compromising the rest of the overflow box.

[gregzz4]

I cut apart a 90g with an Olfa L2 and multiple passes until the blade went all the way through.

[DKoKoMan]

Originally Posted by gregzz4

I cut apart a 90g with an Olfa L2 and multiple passes until the blade went all the way through.

I thought this may work with a bunch of snapping the blade to keep it sharp. My other worry is cutting the black vinyl while trying to remove this darn piece.

[DKoKoMan]

Well I have been looking at my tank and the plumbing over the weeks. It looks like I might be able to cheat a little on the plumbing by ordering a couple new spears unions. I already have unions in place and should be able to add the small amount of plumbing to the existing half of the union. I will have to replace all 3 bulkheads and a couple short runs when the bottom plate is replaced.

I am just waiting for Dave @ Concept to make up the replacement overflow plate. For anyone on the fence with Concept, I would like to assure you I have received great customer service even after the tank was completed...just saying.

On that note it’s been almost 4 weeks since I moved the tank. I lost a total of 3 Coral Frags, no fish and the parameters have been spot on. The only hands on I have been doing is ensuring my salinity hasn’t dropped to much from the crack in the external overflow. Other then that it’s business as usual. I’m a little annoyed as I found a couple aptasia that I need to get rid of. In my first tank I used to use lemon juice and give them a squirt. I hadn’t had to deal with them for a long time. Is there any new effective methods for removing them? I plan on buying 10 peppermint shrimp to toss into the display. Let me know reefers what works for you in the meantime!

[DKoKoMan]

Silicone repairs to the massive crack in overflow plate.



Full tank shot. Scape is almost the same with a couple tweaks.

[saltynuts]

Looking good sir!

I’ll have to start the 150 build journal now lol

[DKoKoMan]

Originally Posted by saltynuts

Looking good sir!

I’ll have to start the 150 build journal now lol

Thanks Ed. Yes you will have to document all your progress! Looking forward to following it.