Ice cap salinity refractometer

[tang daddy]

So I emailed Coral Vue about the refractometer and their reply was...

The small rubber cup is throwing the readings off, if you are able to test the water in a glass cup or plastic container this is the best solution. You can also dip the probe in the tank as long as it’s not near any electrical device otherwise it may effect the reading by .01. Make sure the container you test in has even amount of space around the probe as this may effect readings aswell.


I tested it in my refuge and it read 1.026 then in a cup it was 1.027 but when I used the silicone cup provided it tested 1.024. So for conclusion the meter works just don’t use rubbers provided!

Coral Vue should ship out free New testing containers to all the people that have already purchased one as you would think for the price you pay for accuracy how did this big screw up happen.

[604reefer]

Originally Posted by tang daddy

So I emailed Coral Vue about the refractometer and their reply was...

The small rubber cup is throwing the readings off, if you are able to test the water in a glass cup or plastic container this is the best solution. You can also dip the probe in the tank as long as it’s not near any electrical device otherwise it may effect the reading by .01. Make sure the container you test in has even amount of space around the probe as this may effect readings aswell.


I tested it in my refuge and it read 1.026 then in a cup it was 1.027 but when I used the silicone cup provided it tested 1.024. So for conclusion the meter works just don’t use rubbers provided!

Coral Vue should ship out free New testing containers to all the people that have already purchased one as you would think for the price you pay for accuracy how did this big screw up happen.

Lol, that's ridiculous! "Hey the cup we sold it to you with doesn't work properly"

Just noticed on J&L webpage it says "Please note: It has been found that the included cup may distort the results. We recommend testing in a separate glass container (best), or a larger plastic container."

Would you still recommend one without use of the cup? Still thinking of getting one haha

[lemon604]

I got 2 of the coral life with the swinging arm and always get 2 different reading and both are way off. I got the icecap yesterday and really like it.

[604reefer]

Originally Posted by tang daddy

So I emailed Coral Vue about the refractometer and their reply was...

The small rubber cup is throwing the readings off, if you are able to test the water in a glass cup or plastic container this is the best solution. You can also dip the probe in the tank as long as it’s not near any electrical device otherwise it may effect the reading by .01. Make sure the container you test in has even amount of space around the probe as this may effect readings aswell.


I tested it in my refuge and it read 1.026 then in a cup it was 1.027 but when I used the silicone cup provided it tested 1.024. So for conclusion the meter works just don’t use rubbers provided!

Coral Vue should ship out free New testing containers to all the people that have already purchased one as you would think for the price you pay for accuracy how did this big screw up happen.

Bought one today!

Silicone cup: 1.024
In tank: 1.026
In glass: 1.026

If the probe is touching the bottom of the glass the reading drops all the way to 1.023.

The thermometer on it shows tank 2 degrees F higher than my digital kitchen thermometer (lol).

Overall, happy I don't have to use my refractometer constantly