|
|
|
|
|
#1
03-26-2018, 04:31 AM
|
||||
|
||||
got it plumbed today. my floor is wildly unlevel front to back, side to side is perfect. will have full length shims made and stained tomorrow. hopefully water Tuesday or Wednesday.
had the 48" light already but needed to order a 16", its ment to show up wednesday. my black sand will be in on tuesday. had an expensive 7 min shopping trip in JL this weekend with ordering 6 bags sand, 2 MP 40s and a few buckets of salt and some aquarium safe silicone for the bulkheads hopefully water test goes good then ill drain it and put in sand and aquascape so hopefully I can get salt in it and start the cycle in the week after the long weekend. I will mix the salt in my 55 Gal mixing drum and then pump it into tank as opposed to mixing in the tank. for once Im going to dry aquascape it before water
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC 
|
|
#2
03-26-2018, 11:17 PM
|
|||||
|
|||||
|
Good luck!
|
|
#3
04-07-2018, 09:14 PM
|
||||
|
||||
|
well water test went good. after that I drained it as I was going out of town for a wedding for 5 days and it made me feel better haha
So now that Im home its been filled back up and aquascape is done. Im not sure Im 100% happy with it but some minor tweaks and ill see. its currently filled and have the 2 new MP40s and the return running, just a little murky from the sand right now when its clearer ill post some pics.
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC
|
Hybrid Mode
