Looking for Advice on Tank Transfer

[DKoKoMan]

Forgot to add... I have done a lot of searching and there is a lot of contradictions. If anyone can offfer a step by step that would be great! I understand it’s a lot of work to write up however it would be greatly appreciated.

[spit.fire]

run bare bottom for awhile after the transfer and add sand later

[AquaAddict]

When I transferred my 100 gal to my 150 gallon, I added new sand right a way, then 2/3 pieces of my old rock and then waited for the tank to cycle. I then slowly added the rest of the rock a little at a time; then I added the hardiest corals; then the next hardiest, etc. I didn't have any fish because I had to stuff everything into a 65 gallon ex fresh water tank. I even had to put some of the rock into a rubbermade container with a light propped over top to keep it 'alive'. That's the rock that went first into the new tank.

AquaAddict

[DKoKoMan]

Originally Posted by spit.fire

run bare bottom for awhile after the transfer and add sand later

I thought about doing that however my goby and pistols love the sand!

Originally Posted by AquaAddict

When I transferred my 100 gal to my 150 gallon, I added new sand right a way, then 2/3 pieces of my old rock and then waited for the tank to cycle. I then slowly added the rest of the rock a little at a time; then I added the hardiest corals; then the next hardiest, etc. I didn't have any fish because I had to stuff everything into a 65 gallon ex fresh water tank. I even had to put some of the rock into a rubbermade container with a light propped over top to keep it 'alive'. That's the rock that went first into the new tank.

AquaAddict

Thanks for your input. I’m really hoping that the transfer will be a large WC and not a cycle. I plan on buying a bunch of Rubbermaid’s to separate fish, LR, inverts etc. I will have heaters and a power head in each to try and make it feel less like a box.

[spit.fire]

Originally Posted by DKoKoMan

I thought about doing that however my goby and pistols love the sand!

put them in the jar with sand

[gregzz4]

Are you planning on this to be a 1 day event?
If so, I'd stay away from the planned live sand. It in itself will cause a cycle 'spike' that I'd not want to deal with. The 'dead matter' in the so-called 'live' sand will create ammonia that you do not want right now.
If you are able to store enough old Water Change water, I'd suggest you hang onto it all. The less 'new' saltwater you use the better.

If you're looking for some bacterial support during your transfer, put a large amount of filter material in your sump a month ahead of time.
If you don't have time for this, use Seachem Stability or something similar. And use LOTS of it.
Follow the bottle instructions, and make sure you aerate the water very well.
And I'm not kidding, you're going to use LOTS of it, so make sure you buy enough for at least a week.
Also, buy a Seachem Ammo ALERT Badge. This will be very helpful and may save you losing critters.
And finally, be prepared to perform very large water changes if ammonia gets too high. Or at the very least, buy some Am Guard or something similar and keep it close by. Check it every couple/few hours if you can. Ammonia can kill critters faster than I thought and I've lost enough to know better now.
Am Guard used in conjunction with the Ammo Alert is easy. Just don't over-do it. Follow the instructions.
And, as I already stated, be prepared to perform large water changes. 25-50% if needed.
Also, keep an eye on your Nitrites and Nitrates once you see Ammonia. You are going to have a cycle and must keep an eye on it !!!

Good luck !!

[DKoKoMan]

Originally Posted by spit.fire

put them in the jar with sand

That’s an idea I never thought of

Originally Posted by gregzz4

Are you planning on this to be a 1 day event?
If so, I'd stay away from the planned live sand. It in itself will cause a cycle 'spike' that I'd not want to deal with. The 'dead matter' in the so-called 'live' sand will create ammonia that you do not want right now.
If you are able to store enough old Water Change water, I'd suggest you hang onto it all. The less 'new' saltwater you use the better.

If you're looking for some bacterial support during your transfer, put a large amount of filter material in your sump a month ahead of time.
If you don't have time for this, use Seachem Stability or something similar. And use LOTS of it.
Follow the bottle instructions, and make sure you aerate the water very well.
And I'm not kidding, you're going to use LOTS of it, so make sure you buy enough for at least a week.
Also, buy a Seachem Ammo ALERT Badge. This will be very helpful and may save you losing critters.
And finally, be prepared to perform very large water changes if ammonia gets too high. Or at the very least, buy some Am Guard or something similar and keep it close by. Check it every couple/few hours if you can. Ammonia can kill critters faster than I thought and I've lost enough to know better now.
Am Guard used in conjunction with the Ammo Alert is easy. Just don't over-do it. Follow the instructions.
And, as I already stated, be prepared to perform large water changes. 25-50% if needed.
Also, keep an eye on your Nitrites and Nitrates once you see Ammonia. You are going to have a cycle and must keep an eye on it !!!

Good luck !!

Thanks so much for the information gregzz. I will definitely pickup one of those ammonia badges to make it easy to see if ammonia is present and buy the liquid remover. As far as sand goes could I go with just dry sand considering my LR is well established? I would like to get it all done within the day and will have make up water available (saltwater). My plan is to get as much water as I can in to the new tank from my existing one. I will definitely test the parameters to ensure nothing is going out of whack. Thanks for all the little tips! Every little bit helps to reduce human error.

[CHEAPREEF]

I did my last tank transfer with running BB for about a month like Spite.Fire said. I just added in the sand over a few days after a month of BB. I never lost anything in the move.