Sick and Tired of Waveline pumps

[daplatapus]

Originally Posted by byee

I was expecting WAVELINE daniel@rlss.ca to reply publicly on the forum or privately with daplatapus.

Nope, haven't heard a darn thing from anyone.... disappointing seeing how much pumps and other equipment I've bought from them over the last couple years.

Originally Posted by FishyFishy!

I was bored today....took my jebao 12000 controller and power supply and plugged in my old DC10000 return pump and it runs like normal haha. Good thing jebao parts are available. Might just get some of those to get the wavelines up and running.

You know, I was considering doing this too. I'd also like to confirm this.

[_Adrian_]

My driver is coming along nicely :P


CN1 and CN2 are power feed / loop through to other modules.
I separated the drivers from the logic side for ease of serviceability as well as future upgrades.

[daplatapus]

Originally Posted by _Adrian_

My driver is coming along nicely :P

You have to keep us up to date on the progress of this. Have you reverse engineered the Waveline controller or is this from scratch? Only reason I ask is I'm still totally stumped why the Gen 1 controller performs so differently from the Gen 2.

[_Adrian_]

Originally Posted by byee

Adrian, nice!

Will your controller easily integrate with all DC return pumps?

Will you be making this available for DIY'ers?

Thank you!

It will run most, if not all sensorless BLDC pumps.
And yes, once its been tested I will make it available to the DIY crowd

Originally Posted by daplatapus

You have to keep us up to date on the progress of this. Have you reverse engineered the Waveline controller or is this from scratch? Only reason I ask is I'm still totally stumped why the Gen 1 controller performs so differently from the Gen 2.

This is completely off reservation so to speak as the drivers I'm using are capable of 600VDC and 30A continuous current if cooled properly, so in other words it's complete overkill!
As far as the Waveline controllers go... I have no clue and only can go by the pictures were posted. IF I had a better high res pictures of the V1 and V2 controllers I could most likely reverse engineer something, however since they are still using a discrete H bridge its simple yet a crude way of approaching this.

Either way... My plan is to use a micro that is capable of driving multiple channels... you know just in case you have multiple return pumps and another dc pump on your skimmer. My aim is for a maximum of 4 channels with I2C control or stand alone control.

Merry Christmas

[fixerupper]

Originally Posted by daplatapus

Nope, haven't heard a darn thing from anyone.... disappointing seeing how much pumps and other equipment I've bought from them over the last couple years.



You know, I was considering doing this too. I'd also like to confirm this.

Still nothing.
Anyone else hear crickets?

My dream job would be customer service with this company. Just put every contact on 'ignore' put your feet up and enjoy your tank. Unless, of course, it had Waveline pumps in it. Then you'd be so busy swapping them out for something that actually works you'd have no time to respond to anyone.

Mystery solved.

[byee]

It would even be nice if they responded by stating its out of warranty and provide you with an option to purchase a replacement driver.

I guess the effort is too great or they simply don't care. Perhaps its the latter especially if Daniel from Waveline has 'quietly' disappeared and no longer posting on this forum.

[FishyFishy!]

Originally Posted by fixerupper

Still nothing.
Anyone else hear crickets?

My dream job would be customer service with this company. Just put every contact on 'ignore' put your feet up and enjoy your tank.

Mystery solved.

LOL. Such an easy job eh??? That lucky bugger

[fixerupper]

Gonna bump this every month until I hear that someone somewhere somehow has had their (or any) issue resolved by this company. I'd feel crappy if someone else got stung by these people because this thread faded away.

[daplatapus]

Ya, I haven't heard hide nor hair from them either. Sucks as it seems like my pumps are getting even worse than they were before. I only have 1 running now and it's pumping just enough to overcome the head pressure and that's it

[Waveline]

Originally Posted by daplatapus

Nope, haven't heard a darn thing from anyone.... disappointing seeing how much pumps and other equipment I've bought from them over the last couple years.



You know, I was considering doing this too. I'd also like to confirm this.

Any 24V power supply would work as long as the AMP are correct.