NEW Tank Build !!!

[sphelps]

If you can pick a permanent location you could use a hole saw with a drill guide to remove the acrylic where the MP10 will sit.

[Aqua-Digital]

Originally Posted by sphelps

If you can pick a permanent location you could use a hole saw with a drill guide to remove the acrylic where the MP10 will sit.

The acrylic is inside the tank.

[sphelps]

Originally Posted by Aqua-Digital

The acrylic is inside the tank.

I know where it is You can easily get a drill and a guide in there, yes you'll have to drain the water but it's an idea if you're set on using MP10s