One Cubic Meter of Ocean

[lastlight]

christmas came early you must be stoked!

guess you need to make your trips count seeing as you need to prep with the extra jerrycans of gas and food rations when you hit the road.

[sphelps]

Originally Posted by lastlight

guess you need to make your trips count seeing as you need to prep with the extra jerrycans of gas and food rations when you hit the road.

This should be your new avatar

[riceboy]

the cure is everything costs 5-10 dollars each and it was a sale buy 1 get one free lol

[sphelps]

Originally Posted by riceboy

the cure is everything costs 5-10 dollars each and it was a sale buy 1 get one free lol

lol, we share a bank acount

[riceboy]

lol guess ur sol unless u stop by and get her flowers everytime u buy something lol just say ur always thinking of her and quickly run downstairs lol

[sphelps]

Originally Posted by riceboy

lol guess ur sol unless u stop by and get her flowers everytime u buy something lol just say ur always thinking of her and quickly run downstairs lol

Haha nice

She'll be fine once she sees all the pretty colors

[sphelps]

I got my two fridges in place this weekend. The plan was to get proper front vented ones so they could be built in but unfortunately the choices came down to a lower priced Danby unit which was still over a $1000 a piece for a compressor that would likely fail after a year or better models for $1500-$2000+ a piece. Luckily we found a standard non-front vented Frigidaire model that only required 2" of clearance (most others are 5" +) which is something I can live with.

Next issue was they looked like this

Stainless steel isn't really something that fits in our house or our bar plans and these fridges don't have optional wood door kits.

So I took upon myself to remove all the stainless and fit a wood frame in it's place.


Routered the outside edge to be flush with the door, a little stain and two custom fridges in place for less than a $1000 combined.




They'll look built in once I trim around them.

[kien]

well, I guess I don't have to ask you what method of carbon dosing you'll be employing on your tank..

[Zoaelite]

I have so much more respect for you after seeing this photo !


Ever take the brew tour that they offer?

[riceboy]

lol i guess thats one incentive for us to drive out there lol

Originally Posted by sphelps

I got my two fridges in place this weekend. The plan was to get proper front vented ones so they could be built in but unfortunately the choices came down to a lower priced Danby unit which was still over a $1000 a piece for a compressor that would likely fail after a year or better models for $1500-$2000+ a piece. Luckily we found a standard non-front vented Frigidaire model that only required 2" of clearance (most others are 5" +) which is something I can live with.

Next issue was they looked like this

Stainless steel isn't really something that fits in our house or our bar plans and these fridges don't have optional wood door kits.

So I took upon myself to remove all the stainless and fit a wood frame in it's place.


Routered the outside edge to be flush with the door, a little stain and two custom fridges in place for less than a $1000 combined.




They'll look built in once I trim around them.