Greg's 75g

[Nano]

Ahhh I see

[gregzz4]

Originally Posted by Nano

Ahhh I see

That's it ???? Ahhh I see ???

[burgerchow]

crazy build Greg. Only one major problem I can think of.

Your Display is " TOO SMALL" Lol

with all the effort and equipment in the background, you should go for a Big Display tank. Hmmmm 210 or 300.

[gregzz4]

Ha, ya I know. I actually sold my 125 last Nov. It didn't fit the livingroom well enough and I didn't like the deflection it caused to the floor

[gregzz4]

I finished the 20g QT today. It's not pretty, and will never be.
I tried to use some 3/4" pipe with a union and such, but it was too snug. I wanted to avoid using hose for the algae issue but this is the most quiet and flexible setup.
I have some 5" PVC for caves that isn't in the pics. It'll do the job.
There's an AC50, an 8W UV w/Quiet One 1200 and Eheim 100W. Maybe it's overkill, maybe not. The QO 1200 is padded by a piece of filter material from J&L. I tested it in the sink and there's no way I'd ever have the suction cups holding the pump in the tank.
And, ya, I wasted $15 on one of those Hagen surface skimmers for the Aquaclear. I'm a sucker for gimmicks
It'll all be run by an RKL as I had it already. The heater and UV/pump have their own GFCIs plugged into the RKL





And of course, everyone wants to see the prints my Dad made
Here's, from right to left, the QT, new water tank, and nothing else worth describing

[Nano]

Originally Posted by gregzz4

That's it ???? Ahhh I see ???

Lol I was tired gimme a break. builds looking awesome as always. This will definitely be one clean tank

[ensquire]

Nice ass , ummm errr I meant nice glass..

[gregzz4]

Here's another project I dealt with

Digital Aquatics decided to make their float hangers capable of only reaching tank depths of 11-1/4" max. This is with the float touching the bottom of the tank.
How does that work for me when my sump needs an 18-3/8" hanger ?
I need a low-level pump shut-off that works with my 50g sump

So, out come the tools ....

I used a 20" piece of 1/4" x 1" plex and made my own hanger.
All I needed was 2 pieces of metal to clamp the acrylic to hold the bend area, and a 3rd piece of metal to create the isolation area for heating.
I exposed about 1" of the acrylic holding the 3rd piece and heated it, then moved the 3rd piece under, along with the gun.
When I saw the acrylic starting to become a different clarity, I bent it and held it in place. I then un-clamped it and cooled it with water to speed up the process.

Next I drilled 13/64 holes and tapped them with a 1/4" ( 20 ) NC tap.

It's a slice of pie if you take your time. Just back the drill bit out every 1 second or so. This will alleviate breakage. Pressure, off, pressure, you'll see what I mean. Just don't let the bit bite into the acrylic.

Now I can adjust my floats to any height I choose

I don't think there's much else to say .... here's the pics

[gregzz4]

Somethin' else that irks me with DA switches is you only get 14" of wire to work with.
No amount of heatshrink is going to fully protect the wires from saltwater.
Stupid DA

[Delphinus]

I thought there was such a thing as waterproof heatshrink? .. I'm not sure, I remember someone else mentioning that on the forum a few weeks ago though...

Nice work on the hanger!