lockrookie's 180g (build #3)

[lockrookie]

12mm aka 1/2" whats there now

[jorjef]

Originally Posted by lockrookie

12mm aka 1/2" whats there now

What a 72" brace, the tank glass, or the little pcs. of Euro on the ends of the tank? regardless of your answer 3/8 would solve your problem if they will cut it.

[lockrookie]

the brace is a piece of glass 3" or 4" whide 1/2 thick 72" long siliconed length wise along the topof tank to suport the tank for flex so it doentpop under pressure rather than a brace across the tank in the middle that hinders getting to tank and working inside the tank. i can show you what i mean tomorrow if you like. i already have teh two short pieces just need the long ones

[jorjef]

Originally Posted by lockrookie

the brace is a piece of glass 3" or 4" whide 1/2 thick 72" long siliconed length wise along the topof tank to suport the tank for flex so it doentpop under pressure rather than a brace across the tank in the middle that hinders getting to tank and working inside the tank. i can show you what i mean tomorrow if you like. i already have teh two short pieces just need the long ones

Ya I know that, i was asking what was 1/2"...... the tank, the end euro pcs. or the 72" euro (that was the smart ass part of the question I know there wasn't a 72" brace on the tank) Why won't 3/8 glass work?

[lockrookie]

Originally Posted by jorjef

Ya I know that, i was asking what was 1/2"...... the tank, the end euro pcs. or the 72" euro (that was the smart ass part of the question I know there wasn't a 72" brace on the tank) Why won't 3/8 glass work?

two thin and would crack under pressure in reality i should use 5/8 for piece of mind but 1/2 should do the trick.

[jorjef]

Originally Posted by lockrookie

two thin and would crack under pressure in reality i should use 5/8 for piece of mind but 1/2 should do the trick.

Tell Pam I want to know why she hasn't suffocated you with a pillow yet! lol Later.

[lockrookie]

some days she would like to but i remind her this ugrade was her idea.....