![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() Won't hurt to use what you have, no.
Your carbon block may clog faster than you'd like because it has a pore size smaller than the pore size of the sediment filter. Russ |
#2
|
|||||
|
|||||
![]() I haven't seen any evidence of a pressure gauge on your system. If you don't have one, it would be a good idea to include that on your shopping list. Great way to monitor how your system is performing, along with the TDS meter. I actually use two pressure gauges, one at the source/input so I know what pressure is going in, and the second in the customary position between the pre filters & RO membrane. By comparing the two readings I can pretty much tell when the sediment filter needs attention or replacement. That's one of the items that gets changed out quite regularly on my system with 210 TDS source water. Good thing it's one of the less costly consumables.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#3
|
||||
|
||||
![]() Mike is right on. A TDS meter and a pressure gauge are two tools we tell cutomers are critical to successfully run/troubleshoot/maintain these systems over time.
Russ |
![]() |
Thread Tools | |
Display Modes | |
|
|