Impeller seized in MAG 36 pump I bought from fellow CanReefer, NEED A NEW IMPELLER!!

[ILIKECOUGARS]

BA on line has them.
http://www.bigalsonline.ca/BigAlsCA/...gdrive3600pump

[The Grizz]

Originally Posted by Raven34

You might just want to cut that pump out. That mag will be so loud that you wont be able to think. I tried a mag 24 as a return and my wife almost left me. You will be able to here it from anywhere in your house.

I would if I had another option out there that would cost under $100 ATM I am tapped.

Originally Posted by Marlin65

You might consider getting a Dart they push 3200 and the can be dialed back.
I run one on my closed loop and they are a great pump. You can get used ones for around $200 usually. Just make sure the shaft seals are good.
There was an ad for a Dart gold on here I think it was from Aquatics addiction his personal stuff that he had left over. Almost new if I remember right.

So the dart would be a good choice to replace this pump as soon as I get $$$ would you say .Again need an option that will not cost to much right now but once the 155 BF has been picked up I will have money to buy a new pump.

[The Grizz]

Originally Posted by ILIKECOUGARS

BA on line has them.
http://www.bigalsonline.ca/BigAlsCA/...gdrive3600pump

OUCH I have found them cheaper then that just have to find out how they ship and how fast.

[Raven34]

Maybe just run a couple of power heads until some money comes in if you have some. It will save some money.

[The Grizz]

Originally Posted by Raven34

Maybe just run a couple of power heads until some money comes in if you have some. It will save some money.

I have more then one tank I am working on so it will get used some where and would still need to be fixed. And I don't want power heads in the new 8' DT even if it is temp solution.