![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
![]() It's usually up around 1.023, I just did a water change and was a little off, after adjustment its now sitting at 1.0215-1.022, I'll be adjusting that over the next 24 hours now that I know 1.025 is better, Thank you!
|
#12
|
|||||
|
|||||
![]() 76F is a bit low as well 79F is better and will stabilize your tank more.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#13
|
||||
|
||||
![]() Your salinity seems low (should be 1.025)
What fish and corals do you have left so to figure out if they possibly can be treated.? Maybe take a water sample to red coral and ask if they test water. Hopefully someone more experienced chimes in. Lucy |
#14
|
||||
|
||||
![]() If it is flat worm you can try and get as much of the white stuff out of the tank. Do a 20% water change to alleviate the water conditions. If it does not improve the out break at least it will give you more time to figure it out. Best thing you can do is move your fish to another tank all together. If the nem dying then there is little you can do to help it out, but you can help save your fish. Does the water smell? Nems smell really bad when they die really bad.
Take a sample of the white stuff to Red Coral they may know of a couple of tests that they can do 1 would be to put some on a slide and under a microscope. One can get a good idea for a slide as to what it is if you have contacts in a lab. They can match it up to pics of slides they have on file or one could try and contact a university and ask some there if they would like try and figure it out as a lab assignment. Marine bio Lab. salinity should be between 1.023 -1.025 Temp should be no lower than 75 but should be at 78 or 79. I keep mine at 78 but has droped the 76 for a few days when it gets realy cold in my basement, It all depends on the Nem that you have. here is and artical on Nems. http://www.saltcorner.com/sections/z...s/anemones.htm Bill Last edited by bvlester; 12-10-2009 at 04:04 AM. |
#15
|
||||
|
||||
![]() It doesn't smell at all, and they are round "colonies" they don't look like worms... I have already done a 10% water change 7 days ago and a 20-25% water change 2 days ago, still have high ammonia!
I will definintely take in a water sample though and if ammonia levels aren't down in the am I bought a spare tank to switch everything over if needed. I think now I just have to wait for the "Stability" chemicals to kick in and reduce the ammonia... if not, I'm lost for a solution other than emptying and cleaning the problem tank |
#16
|
||||
|
||||
![]() Would over feeding Kent Marine Coral Accel cause all these problems? I thought I was on the cautious side only using it 2-3 times a week but I'm starting to question it now...
I have polyps and it was recommended to put this in my tank to help keep them healthy? |
#17
|
||||
|
||||
![]() I have 3 clown fish (2 spp), the green tip polyps, a cleaner shrimp, anemone, lawnmower blenney, 2 fire tail gobies I think they're called, hermit crabs (with the blue tip claws), a long spined urchin (he's not looking so good) and a yellow tang. I have about 10lbs of live rock in a 47US Gallon tank.
|
#18
|
||||
|
||||
![]() Do you run a skimmer? Sounds like a fair size bio-load and not enough live rock for filtration.
|
#19
|
||||
|
||||
![]() First if your water changes have not had any afect on the ammonia levels you test kit maybe bad. you should see a deffinit drop in the ammonia level exspecialy if you have done a 25% water change. you could do anouther 10% water change today and every 2-3 days till you find out what is happening. What snails do you have in your tank?
I am asking you this because I have white disk like snail eggs on my glass and rocks and they apear almost over night. I'll try and get a good pic of some and post in this thread. you also said that you have afilm on the water top this could be from the snails sponing and you have extra ditris that is being suspended in the water colume try and redirect your power head so it disterbs the water surfaces see if this helps to clear it up. I get this on my kids tank once in a while you can scoop as much of the floating stuff off the top. If you have too many snails or there spon is dead it will rase your ammonia level. don't panic go slow. I'll check back in a while as I have to go get some shrimp and maybe my fish came in also. Bill |
#20
|
||||
|
||||
![]() I have a skimmer fit for the size of tank and a filter on it, it was ok before with some die offs if I didn't do frequent enough water changes but I've been good about them lately.
The ammonia kit should be ok, I've done tests in the recent past that were zero for ammonia. I don't have any film on the water surface, just the glass and stuff inside the tank under the water. I don't have any snails, other than 2 tiny ones that came with the live rock way back in Feb. I will keep up with the water changes every few days, the ammonia levels have come down but not by much ![]() ![]() Thanks everyone, I will update in the morning with how the increase salinity, temp and Stability additive for ammonia works out. |
![]() |
Thread Tools | |
Display Modes | |
|
|