Dave I checked that earlier and its all clear. I have a flow meter on the unit and it drops off when the air builds up. I'll take a pic for everyone to show.
Quote:
Originally Posted by wickedfrags.com
There is supose to be air in there (usually the top 1") but you should still have effluent.
Check the efffluent tubing to the tank and see if it clogged (this happens on the intake as well). Try blowing out the tubing, and if the air does not pass through, what I do is use a long piece of aircraft wire of the correct diameter and snake the tubing (you could also replace the tubing). You should see the stuff that comes out!
It could also be pressure due to aragonite breakdown as noted below. Let us know what you find and if it is not fixed post a pic for us.
WF
|
__________________
Mike
150g reef, 55g sump, T5's, Vertech 200A, Profilux III - German made is highly over rated, should just say Gerpan made.
Reefkeeper - individual obsessed with placing disturbing amounts of electricity and seawater in close proximity for the purpose of maintaining live coral reef organisms.
|
01-29-2008, 04:59 PM
Threaded Mode
