Profilux II plus aquarium controller

[Matthias Gross]

Hi,

up to 8 cycles per day.
In firmware 3.00, going to be released soon, will be new features regarding dosing and controlling.

[honkey sauce]

niloc16 the pumps have to be assigned to L2 and one to L3.I bought mine at H.R. so they should be the same

[niloc16]

thanks man, i havent had the problem since so whatever i messed with worked. i'll have to go over what i changed and see where the setting are.

[niloc16]

i have had the problem with the lighting not shuttting off three times now on 3 different sockets, 3 different lights. 2 times with the halides each one is plugged into different sockets and on seperate powerbars and 1 time with my actinics (2 54w T5's) also on a different socket. the only way that i can get them to turn off is to reassign the outlet to be permanent and change it back to a clock timer. tapping on the powerbar did not switch it off.

[Matthias Gross]

One problem solved and just getting the next one...

The most important question is:
Is the LED on when the socket has power?

If yes: The hardware (powerbar) is OK and is just doing what it is told to do by ProfiLux.
->then there may be a mistake in your settings. In this case please
give me the complete settings of your timer (mode, count of times, the times, ...).

If no: The powerbar does not what ProfiLux wants.

[honkey sauce]

ah man, my power bar just stayed on permanantly too for my actinics.I havent even ajusted anything in aweek.the LED still works with the settings like yours too.I think its pooched.I think?

[Matthias Gross]

@honkey sauce: What are Actinics? Metal halide lamps? (i am still learning English).
Do i understand you correctly: LEDs follow the settings you made but the socket's power is not switched simultanesly to the LED?