|
|
|
#1
11-27-2005, 05:16 AM
|
|||||
|
|||||
Shocking
The last couple times I've stuck my hand in my 70G tank, I've got a decent little shock. One time, I was touching my powerhead, the other time my elbow was touching the MH pendant and as soon as my hand touched the water, I got a shock. Any suggestions?
__________________
Jason 
|
|
#2
11-27-2005, 05:40 AM
|
||||
|
||||
|
"Don't stick your hand in the tank!!" <sorry, had to>
Try unplugging one piece of equipment at a time to see which one is the culprit. Of course, this suggestion requires you stick your hand in the water to test if you still get shocked, so maybe someone else has a better idea? Also, check your powerbar to see if its working properly. HTH, Anthony
|
|
#3
11-27-2005, 05:41 AM
|
|||||
|
|||||
|
A grounding probe... salt water is a wonderful conductor of electricity, but a grounding probe will allow that excess juice to exit via your house ground. I don't have one, (probably should), but I've never been shocked either. Might be worth looking into seeing if a piece of your equipment may be the cause too... I gotta come and have me a look soon... GITERDONE!
__________________
135G Mixed Reef. Bullet 2, 25 gal refugium, 2 X250W MH + 4X 96W PC\'s, DIY Calcium Reactor, Coralife 1/6 HP Chiller, Phosban, Tunze, 2 closed loops & SQWD\'s, Seios, Coralife 4 stage RO/DI & a bunch of other expensive gadgets... I may never retire, but I'm gonnahavahelluvanaquarium!
|
|
#5
11-27-2005, 05:12 PM
|
|||||
|
|||||
|
yeah, just test your equipment by unplugging them one by one.
__________________
- S H A O -
|
|
#6
11-27-2005, 05:34 PM
|
|||||
|
|||||
|
a grounding prob will only hide the problem, I would systimaticly reproduce the shock by trying to shock your self and each time unplug one electrinic componant untill you don't get the shock, this will let you find the faulty equipment and then you can replace/repair it.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#7
11-27-2005, 07:17 PM
|
||||
|
||||
|
This happened to me , and it turned out to be a power head the wire was broken near the Epoxy I noticed it when I looked down and I saw a flash every now and then.
Removed it and have not had it since. Changes are it could be the power head. Like everyone said unplug various pieces of equipment and test again  Jim
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors
|
|
#8
11-27-2005, 08:01 PM
|
|||||
|
|||||
|
I'm thinking maybe a multimeter might be an alternative to using your hand in the water to find whether there's current or not. You can probably get a cheapy one for $20 at Home Depot/Rona/etc. or Radio Shack (or "The Source by CC" or whatever they call themselves now)...
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
|
#9
11-27-2005, 08:04 PM
|
||||
|
||||
|
Ahh but thats no fun Tony
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors
|
|
#10
11-27-2005, 11:25 PM
|
|||||
|
|||||
|
I had that happen once and I found out that it was my powerbar!!!
__________________
500G Mixed Reef  __________________________________ Electrician, Electronics Technician, I can help with any electrical questions you might have!! __________________________________ Kevin
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
