Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   Shocking (http://www.canreef.com/vbulletin/showthread.php?t=20582)

Jaws 11-27-2005 05:16 AM

Shocking
 
The last couple times I've stuck my hand in my 70G tank, I've got a decent little shock. One time, I was touching my powerhead, the other time my elbow was touching the MH pendant and as soon as my hand touched the water, I got a shock. Any suggestions?

SeaHorse_Fanatic 11-27-2005 05:40 AM

"Don't stick your hand in the tank!!" <sorry, had to>

Try unplugging one piece of equipment at a time to see which one is the culprit. Of course, this suggestion requires you stick your hand in the water to test if you still get shocked, so maybe someone else has a better idea?

Also, check your powerbar to see if its working properly.

HTH,

Anthony

reeferaddict 11-27-2005 05:41 AM

A grounding probe... salt water is a wonderful conductor of electricity, but a grounding probe will allow that excess juice to exit via your house ground. I don't have one, (probably should), but I've never been shocked either. Might be worth looking into seeing if a piece of your equipment may be the cause too... I gotta come and have me a look soon... GITERDONE!

inspector 11-27-2005 07:39 AM

shocking
 
anthony wrote
Quote:

"Don't stick your hand in the tank!!" <sorry, had to>

I suggest you get someone to give you a hand(in the tank)sorry i could'nt resist. Paul

smokinreefer 11-27-2005 05:12 PM

yeah, just test your equipment by unplugging them one by one.

StirCrazy 11-27-2005 05:34 PM

a grounding prob will only hide the problem, I would systimaticly reproduce the shock by trying to shock your self and each time unplug one electrinic componant untill you don't get the shock, this will let you find the faulty equipment and then you can replace/repair it.

Steve

DiscusZ 11-27-2005 07:17 PM

This happened to me , and it turned out to be a power head the wire was broken near the Epoxy I noticed it when I looked down and I saw a flash every now and then.

Removed it and have not had it since.

Changes are it could be the power head. Like everyone said unplug various pieces of equipment and test again :)


Jim

Delphinus 11-27-2005 08:01 PM

I'm thinking maybe a multimeter might be an alternative to using your hand in the water to find whether there's current or not. You can probably get a cheapy one for $20 at Home Depot/Rona/etc. or Radio Shack (or "The Source by CC" or whatever they call themselves now)...

DiscusZ 11-27-2005 08:04 PM

Ahh but thats no fun Tony :)

KrazyKuch 11-27-2005 11:25 PM

I had that happen once and I found out that it was my powerbar!!!


All times are GMT. The time now is 02:08 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.