![]() |
#25
|
|||||
|
|||||
![]() Besides the good advice given while I was writing this letter
![]() Quote:
Quote:
Quote:
![]() I built, then tested, then re-built etc I see you have a 16" tall tank. I suggest you use as much of that height as you can. You'll need to build a stand for your skimmer, but ... You'll increase your return area by 2g or so, depending on the height of your baffles. This may be all the powerout room you need. Plus, this will increase your total system volume Hopefully others with a sump similar to yours will chime in ... What I did was decide what skimmer I'd want to buy in the future and made that chamber as narrow as possible. I also built it as high as possible I didn't plan on a DSB, so I built a small hang-inside tank for chaeto (later I built it remote). This allowed me to have it be part of the return area which freed up lots of extra volume for powerouts and total return chamber size Last edited by gregzz4; 01-01-2013 at 11:28 PM. |