Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 03-10-2008, 02:19 PM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

Where is the tank located? What is the warmest and the coolest temperature that room gets to? What temperature are you aiming for with your tank?

Personally, I have found that if you use multiple heaters of a lower wattage it is MUCH more reliable. If one heater gets stuck on (it happens more often than you would like to know!) then one heater alone isn't enough to cook your tank. If one fails, then there is still a backup or two that can keep the tank at least moderately warm. One heater is ok, two heaters is better, three heaters is best! Ever since I started this type of setup 6 or 8 years ago I haven't had an issue. Before I started using this method I had several heating mishaps.

Depending on the temperature of the room your tank is in, you're probably looking at about 450w total. If I were you I would use three 150w Ebo or Visitherm or other decent quality heater. I don't think the super expensive heaters are worth their price tag. I honestly don't think there's anything more reliable about them. They are superior for other reasons, but not reliability, IMO.
__________________
~ Mindy

SPS fanatic.

Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 07:31 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.