CadLights 39G Signature

[Oscar]

So I called Eddie at Cadlights to request replacement panels for the cabinet. I had thought about fiberglassing the cabinet panels but since they are wieght bearing I figured I should at least start with the right components.

So I opened up the box with the aquarium. The signature series comes with the following:
- pin wheel skimmer
- pump
- UV sterilizer
- bio balls
- 2 filter pads
- refugium light
- cooling fan
- lockline
- Hydor 360 degree wavemaker
- glass tank top
- lights with HQI, actinics and LEDs in one box
- (no heater included)

But does not come with installation instructions. For a newbie this is a bit of a problem but it all worked out.

I had never handled a skimmer before so I was perplexed when I opened the box and discovered the air line and a little piece of black plastic in the skimmer cup. After scratching my head for a couple of days I realized that the black piece of plastic was actually the nipple leading from the pump to which the rubber hose is to be attached.

The nipple is that little black thing on the styrofoam.




So I got out the fiberglass epoxy and glued the nipple to the faceplate on the skimmer pump.