Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Pump Specific

Reply
 
Thread Tools Display Modes
  #1  
Old 09-18-2012, 01:51 PM
WindowMaker WindowMaker is offline
Member
 
Join Date: Dec 2011
Location: Peterborough, ON
Posts: 103
WindowMaker is on a distinguished road
Default New main pump, suggestions

Hi all, Im getting sick of my tank sounding like a generator all the time so I am hoping for some suggestions.

Currently I am running a mag9.5 for return and to mj1200's for my reactors.

I would like to integrate all of this into one pump, but also want an increase in flow.

I am ok with internal or external pumps, but I am hoping for something that is 1500-1800gph

my overflow is rated to handle 1600, but by the time you add in the head loss from height and the pressure lost to the reactors, I figure this is perfect.

QUIET is key in this. I would rather not hear it at all.

Suggestions?

Thanks!
Reply With Quote
  #2  
Old 09-18-2012, 02:12 PM
FishyFishy!'s Avatar
FishyFishy! FishyFishy! is offline
Gold Member
 
Join Date: Sep 2010
Location: Calgary SE
Posts: 1,674
FishyFishy! will become famous soon enough
Default

That is a bit odd i'd say. I had 2 X Mag 9.5 pumps running on my 131 and it was silent as can be.

I wouldn't think again about recommending a newer/bigger Mag pump with a manifold system to go to your reactors. If it is loud, there is a reason for it usually. Something is most likely vibrating. Vibration dampening on any internal pump is the key to silence.
__________________

They call it addiction for a reason...
Reply With Quote
  #3  
Old 09-18-2012, 02:25 PM
WindowMaker WindowMaker is offline
Member
 
Join Date: Dec 2011
Location: Peterborough, ON
Posts: 103
WindowMaker is on a distinguished road
Default

I have it set up externally at the moment, my sump really isnt big enough so it was my only option. Im building a new sump now and will have room to run internally in the future.

My current mag seems to be dying though, Ive cleaned it thoroughly, but it seems like the flow is less than half of when I first set it up.
Reply With Quote
  #4  
Old 09-18-2012, 04:14 PM
mseepman mseepman is offline
Gold Member
 
Join Date: Aug 2007
Location: Vernon
Posts: 2,529
mseepman is on a distinguished road
Default

i would look into this: http://reefsupplycanada.com/cgi-bin/...ada&item=59357

Controllable so you can adjust the flow.
__________________
Mark...



290g Peninsula Display, 425g total volume. Setup Jan 2013.
Reply With Quote
  #5  
Old 09-18-2012, 04:29 PM
WindowMaker WindowMaker is offline
Member
 
Join Date: Dec 2011
Location: Peterborough, ON
Posts: 103
WindowMaker is on a distinguished road
Default

Though I like the look of that pump, its a bit out of my price range. Ive been looking at pumps like the sedra ksp20000. Opinions?
Reply With Quote
  #6  
Old 09-18-2012, 04:41 PM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

Poseidon/Velocity PS4/T4 is a very quiet pump close to the gph range you are looking for. It will add heat to the water though, good in the winter, not so during a hot summer.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206

Last edited by mike31154; 09-18-2012 at 04:44 PM.
Reply With Quote
  #7  
Old 12-15-2012, 01:52 AM
Reef Pilot's Avatar
Reef Pilot Reef Pilot is offline
Member
 
Join Date: Nov 2010
Location: Langley BC
Posts: 1,883
Reef Pilot is on a distinguished road
Default

Quote:
Originally Posted by WindowMaker View Post
Though I like the look of that pump, its a bit out of my price range. Ive been looking at pumps like the sedra ksp20000. Opinions?
I've got one of those. Great pump and quiet. Used to run a Mag 1800 and the Sedra is way better. My sump is in the basement, and it pumps the return up to the main floor. Plus I have several T's from it to my chiller, Bio-pellet reactor, and carbon and GFO media reactors, all from the same pump. With the Mag 1800 it could barely pump enough flow up to the display tank upstairs, and had to have separate pumps for the other things in my sump.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101
Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022
Solutions are easy. The real difficulty lies in discovering the problem.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 04:40 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.