![]() |
#1
|
|||||
|
|||||
![]() I noticed this morning that my BK mini 180 wasn't running at first I thought I plugged it in the wrong spot on my profilux bar so I plugged it directly into an empty socket. I sat and watched and the pump has a stutter runs perfect then stutter....perfect.....stutter. I took it apart and cleaned it out but no difference. Any Ideas? Impeller or a whole new pump?
Thanks.
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags ![]() My other summer hobby: http://www.edkra.ca Last edited by subman; 08-27-2009 at 04:21 PM. |
#2
|
|||||
|
|||||
![]() Check the impeller shaft. You could have one of those with a ceramic shaft instead of titanium.
|
#3
|
||||
|
||||
![]() The material of the shaft does not make a difference. What you need to look at is the alignment of the bearing.
Anyway, PM'd.
__________________
This and that. |
#4
|
|||||
|
|||||
![]() They got a recall on some pumps, didn't read the whole thread and not sure which of the red dragons but I'd look into it, can't hurt.
|
#5
|
|||||
|
|||||
![]() That's the beauty of the RD warranty. If you can't get it to work properly just take it in and get a new one.
|
#6
|
|||||
|
|||||
![]() Yep within an hour of my original post I had a Pm from Albert with his number and help to fix it! Truly amazing service!
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags ![]() My other summer hobby: http://www.edkra.ca |
#7
|
||||
|
||||
![]() Recall is for RD2 pumps only. All skimmer and return pumps are fine.
__________________
This and that. |
#8
|
|||||
|
|||||
![]() Poo eh, I'd still let them know, maybe you'll be the lucky lottery winner and be that one more that pushes em to a recall
|
#9
|
||||
|
||||
![]() sounds like a broken shaft.
|
#10
|
|||||
|
|||||
![]() Nope the shaft is perfect I think the end bearing may be worn a little and is causing the impeller to be off balance and thus shutting the pump down. Albert at Proline Aquatics has taken care of me and I should be good as gold very soon! Great product, Great warranty and great service!
Thanks for all the input everyone.
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags ![]() My other summer hobby: http://www.edkra.ca |