![]() |
|
View Poll Results: What do you keep your Salinity at?? | |||
1.021 |
![]() ![]() ![]() ![]() |
0 | 0% |
1.022 |
![]() ![]() ![]() ![]() |
3 | 4.76% |
1.023 |
![]() ![]() ![]() ![]() |
2 | 3.17% |
1.024 |
![]() ![]() ![]() ![]() |
17 | 26.98% |
1.025 |
![]() ![]() ![]() ![]() |
29 | 46.03% |
Or higher |
![]() ![]() ![]() ![]() |
12 | 19.05% |
Voters: 63. You may not vote on this poll |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() what is the best level to keep salinity at??
__________________
500G Mixed Reef ![]() __________________________________ Electrician, Electronics Technician, I can help with any electrical questions you might have!! __________________________________ Kevin |
#2
|
|||||
|
|||||
![]() natural sea water is arouind 1.025 and the red sea is hangin around 1.027
its up to you in the long run more salt higher salinity less salt less .
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#3
|
|||||
|
|||||
![]() Usually around 1.025 -.026 for me.
|
#4
|
|||||
|
|||||
![]() I aim for 1.026. Used to run at 1.021 when it was only a marine tank to save on salt but after converting toa reef its best around 1.025-1.027.
Rory |
#5
|
|||||
|
|||||
![]() 1.026 when I check..
![]() |
#6
|
|||||
|
|||||
![]() 1.025 I feel it gives me a small margin because I don't have auto topoff.
__________________
http://www.canreef.com/ftotm/sept05/index.php |
#7
|
||||
|
||||
![]() What sort of differences would be visible if a guy or gal changed from say 1.023 to 1.025? other than buying more salt !
Less green perhaps ![]() ![]() ![]() ![]() |
#8
|
|||||
|
|||||
![]() Up until a few days ago I've had mine at 1.022 but I've since raised it to 1.024 or 1.025. I've noticed that my SPS hasn't been extended as much and I think that might be why.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#9
|
|||||
|
|||||
![]() i used to keep it around 1.023. now i keep mine at around 1.026. i found that my corals look better when my salinty is higher.
__________________
Manuel it's not the size of the fish, it's the motion in the ocean! |
#10
|
||||
|
||||
![]() There are quite a few running at 1.025!
I may have to start slowly increasing mine! |