![]() |
|
#1
|
||||
|
||||
![]() Reef Octopus diablo 200 external skimmer body. Pump died, and I replaced it with a larger skimmer.
Dead pump included $60 Techinical Specs Body Size: 8″ Footprint: 16.2″ x 15.4″ Neck Size: 4.75″ Total Height: 25.98″ Output Size: 50mm - Comes with Metric to British Adapter to 1.5”pvc Output Height: 8.85″ Inlet Size: 3/4" Max Feed Rate: 700GPH Note: Suggest Feed Rate is 1.5-2 times the system volume Pump Information Diablo DC 5500s Pinwheel Pump Power Consumption: 45watts at full speed Air Draw: 2100 lph / 73.5 SCFH* at full speed *Air and water results will vary depending on aquarium setup ![]() |
#2
|
||||
|
||||
![]() Bump
|
#3
|
||||
|
||||
![]() BUMP
$40 |
#4
|
||||
|
||||
![]() Can this be ran in sump?
|
#5
|
||||
|
||||
![]() It's external, so needs a feed pump, however can be physically placed in a sump
|
#6
|
||||
|
||||
![]() I have a BB 5000 thikknit could run this skimmer?
|
#7
|
||||
|
||||
![]() I'm not familiar with that pump, however the max flow rate for the feed is 700gph.
The skimmer requires a pump such as this to be replaced as it is broken http://www.reefsupplies.ca/online-st...mmer-Pump.html |
#8
|
||||
|
||||
![]() It's the bubble blaster 5000 wich pretty much has the same specs
|