FS: YYC - Reef octopus Skimmer body
 

Reef Octopus diablo 200 external skimmer body. Pump died, and I replaced it with a larger skimmer.

Dead pump included

$60

Techinical Specs
Body Size: 8″
Footprint: 16.2″ x 15.4″
Neck Size: 4.75″
Total Height: 25.98″
Output Size: 50mm - Comes with Metric to British Adapter to 1.5”pvc
Output Height: 8.85″
Inlet Size: 3/4"
Max Feed Rate: 700GPH
Note: Suggest Feed Rate is 1.5-2 times the system volume

Pump Information
Diablo DC 5500s Pinwheel Pump
Power Consumption: 45watts at full speed
Air Draw: 2100 lph / 73.5 SCFH* at full speed
*Air and water results will vary depending on aquarium setup

http://i284.photobucket.com/albums/l...psgmkuarlu.jpg

Bump

BUMP

$40

Can this be ran in sump?

It's external, so needs a feed pump, however can be physically placed in a sump

I have a BB 5000 thikknit could run this skimmer?

I'm not familiar with that pump, however the max flow rate for the feed is 700gph.

The skimmer requires a pump such as this to be replaced as it is broken
http://www.reefsupplies.ca/online-st...mmer-Pump.html

It's the bubble blaster 5000 wich pretty much has the same specs

Be nice to get this without big shipping cost to the okanagan. Think it would work great with my pump.

Sold