Quote:
Originally Posted by andestang
Ya I heard about the free install from Aqua-Digital, but I'll tackle my own. Thanks for the heads up on the few unnoted details. Forgot to ask, what epoxy are you using for you rock work - Aquascape Milliput Epoxy ?
|
while you've got that bad boy open, make note of what USB chipset you have on there. It is the chip on the USB controller/port. If you want to install the windows usb driver you'll need the chipset, there are two different ones. I had to open up my box a second when I found out I needed this info. If you need to flash your firmware with the flasher program (like I did), you'll also need to know which microcontroller you've got in there. The flasher program lists a crap load of them and I had to do some searching to figure out which one I had.. I could not for the life of me get the box to flash via USB or ethernet, had to use the serial port and a USB to Serial convert because I have no computers in the house with a serial port. I also had troubles connecting to the P3 upgrade with the latest ProfiluxControl software. I had to flash the firmware to the latest in order to use ProfiluxControl.
I use Tailor Aquatics Epoxy. Seems to be the only kind LFS in calgary (at least the ones I visit) seem to carry.