[riceboy]

I have a 98 honda civic hatch with a turbo charge b18 making 202whp tuned at 9 psi

Mod list

Exterior:
Painted in 2006 BMW Imola red.
96 ITR 4x114.3 conversion
Wings West front lip (was going to replace with CTR replica)
CTR replica headlights

Interior:
Dual gauge pod with autometer boost and water temp gauge
Alpine head unit that place mp3/disc/ipod with Ipod integration cable
Alpine type-s 6.5" speakers in front. Stock in the back
Alpine type r 12 inch sub.
Compustar Pro-series alarm system with door actuators
red itr recaros (drivers and passenger)

Suspension/Brakes:
Koni Yellow adjustable shocks
Eibach Sportline Kit
ASR rear subframe brace with 32 mm sway bar. (Silver in colour)
Big four lug brake conversion. Front and Rear Hawk HPS pads installed.(itr brake conversion)

Wheels:
96 ITR wheels

Motor:
Bone stock B18B motor from JDMSource
Castrol Syn-tech 5w-50 oil.
1 step colder NGK v-power plugs
garret 50 trim t3/t4 (a/r .50 cold side and a/r .48 hot side stage 3 turbine)
3an feed line
10an return line with welded bung
Oil feed sandwich
Blaastperformance log manifold, downpipe 2.5 elbow to full 3 inch with external wastegate recirculating. DP and exhaust is joined by v-band clamp.
Custom Blaast 3 inch exhaust with torctite clamps (no gaskets) and stealth black muffler. (quiet for 3 inch)
Tial 38mm external Wastegate with 8psi spring
No-name intercooler (27.5x7x2.5) 2 inch inlet/outlet painted black with rad paint for stealth look.
Aluminum piping with newer edition HKS SSQV
Used only t-bolt clamps on charge piping.
Hondata s300 engine management
RC 550cc injectors w/ obd2 to obd1 injector conversion harness no splicing of wires.
255lph walbro fuel pump.
Megan racing aluminum 2 row radiator w/slim fan (s-blade)
Tuned by Anthony at Speedtech. Car made 202whp @ 9 psi on Toma's mustang dyno.

plan to finish everything up this year with ctr door panels and power windows (yes power windows in a civic hatch back lol), replace the koni yellow and eibach springs with d2 rs coilovers, add blox lca and blox camber kit, install ctr rear lip, and re-wrap the back ctr bench red to match the front recaros.hid conversion

then i'm finally done
lol