Hmm I may just have to give it a try. I need to fit a skimmer and the divider is in the way. I'll try to dremel route and see how it goes.
Thanks
Quote:
Originally Posted by StirCrazy
you have to find out also if the devider is acting as a brace for the sump walls, if it is you don't want to remove it.
what I recomend is to get a dremmel with a little mini two fluted router bit (I have seen them at home depot with carbon cutting edges) then use it to rout the devider out. you won't be able to get right up against the outside for a flush finnish, but if you are real carfull and get close you could use a little file or scraper, and sand paper and take the stub down. either way a long a tedious job.
depending on what you end goal is it might be faster just to get it as close as you can and leave it.
Steve
|