I have to agree with Colin this is great support and will upgrade to a 6D when they are available. Until that point I was going to modify my Dimming Curve to get around the relay sticking. Can anyone see a problem with this setup?
Before: 2 points
1 - 10:30am, 5 minutes, 100%
2 – 6:25pm, 5 minutes, 0%
After: 4 points
1 – 10:30am, 5 minutes, 100%
2 – 6:25pm, 5 minutes, 0%
3 – 6:31pm, 5 minutes, 1%
4 – 6:32pm, 5 minutes, 0%
This causes the socket relay to be quickly turned on and off 1 minute after the light shuts down. This falls within the 5 minute lamp cool-down period for the IceCap ballasts so if the light does go out at 6:30 the power flash at 6:32 doesn’t turn the light back on.
Thanks again
__________________
Jeff
|