Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Tank Journal

Reply
 
Thread Tools Display Modes
  #1  
Old 07-08-2009, 05:36 AM
kien's Avatar
kien kien is offline
¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.¸¸. ><(((º>
 
Join Date: Apr 2009
Location: Calgary, AB
Posts: 7,665
kien will become famous soon enoughkien will become famous soon enough
Default kien's 150g Room Divider Mixed Reef & Stuff

I guess I am upgrading. My current tank is a 90 gallon. New tank will be 150 gallons at 72" long by 24" wide by 20" deep. At one end there will be an external overflow box built. The overflow box will house 4 1" standpipes for herbies (two main and two secondaries). Eurobracing will have two holes drilled at the opposite end of the tank to drop down two 1" return outlets.

The story so far:

Current tank that was the previous room divider has been moved.. The new tank has been ordered and the stand has been framed.


================
= Table of Contents =
================
Green = Pictures
Blue = Points of Interest

* 2009.07.08 - Return line and general design
* 2009.07.20 - Painted stand and sump equipment (skimmer, return pump) + cutting baffles
* 2009.07.20 - Building a 3 chamber sump (refugium, return, skimmer)
* 2009.07.20 - Stand topper (ikea counter top); tank into place; tank details
* 2009.07.24 - Plumbing the Herbie overflow - tank side
* 2009.07.24 - Plumbing the Herbie overflow - sump side
* 2009.07.24 - Return line plumbing
* 2009.07.28 - Testing the plumbing
* 2009.07.28 - Sump overflow due to return line siphon prevention measure
* 2009.07.31 - Return plumbing partial redo
* 2009.08.05 - Open top canopy - Extreme aquascaping - Tank transfer - First FTS
* 2009.08.09 - How to build a DIY GFCI outlet
* 2009.08.16 - Tank stand doors/cover with Ikea cabinet doors
* 2009.08.16 - Overflow box silencer
* 2009.08.16 - New Sunlight Supply Maristar light fixture installed
* 2009.08.16 - Full in-room tank shots
* 2009.08.30 - Profilux Plus II ex Installed - Under tank wiring - Tank chiller fan
* 2009.08.30 - Misc coral photos
* 2009.11.04 - Profilux View II; Moon/Sunrise/Set LED light - Profilux 3 head dosing station
* 2009.11.04 - Coral and fish, full tank, top down photos - Underwater videos
* 2009.12.30 - Hydor Performer 700 skimmer cup mod 1 - o-ring replacement
* 2009.12.30 - NP-BioPellets start - Misc coral photos Set 1 -- Set 2
* 2010.01.02 - Clown fish spawning
* 2010.01.15 - Hydor Performer 700 Skimmer cup mod 2 - drain to external skimmer collection bottle/container
* 2010.01.19 - NP-BioPellets Week 2 update - My homemade fish food
* 2010.01.20 - Fish stock photos
* 2010.01.22 - Two Little Fishes sponge mod - thinning the sponge
* 2010.02.09 - NP-BioPellets Week 4 update
* 2010.02.16 - new fish additions (Borbonius anthias, Sunburts anthias, Hawaiian Flame wrasse)
* 2010.02.18 - Hydor Performer 700 Skimmer cup mod 2b - replacing external bottle with old hang on filter
* 2010.03.08 - Making Alkalinity and Calcium additives for dosing Randy's Two Part
* 2010.03.18 - New Vertex UF-15 Media reactor for NP Bio Pellets
* 2010.04.01 - April 2010 Featured Tank of the Month !!!
* 2010.04.14 - Profilux II to Profilux 3 upgrade kit installation
* 2010.04.14 - 131g FOWLR add-on Build!
* 2010.04.16 - Bubble Magus 220CS skimmer upgrade
* 2010.04.19 - New Bubble Magus in action
* 2010.04.23 - Vertex UF-15 Media Reactor re-plumb (plumbing hard line)
* 2010.05.02 - 131g completion and Full Reef Photos
* 2010.05.05 - Baby Blue Linckias ???
* 2010.05.17 - My Reef Photography Tips, Tricks, Equipment
* 2010.06.07 - Coral Photo Spread Set 1 -- Sets 2&3 -- Underwater Reefscape
* 2010.06.15 - Polypropylene Mesh/Screen Tank Cover
* 2010.06.18 - Reef Silhouette Pictures
* 2010.09.15 - SPS DEATH!
* 2010.10.04 - Using The Hanna Phosphoate Checker
* 2010.10.08 - Full Room Tank Shots
* 2010.10.09 - The Phosphate Philes - Phosphate levels in various foods
* 2010.10.12 - Baby blue Linckia update
* 2010.10.15 - Reef Coral Photos
* 2010.11.22 - Thalassoma Lutescens - aka The Banana Wrasse!
* 2011.01.06 - January 2011 - Update with FTS' - Coral p0rn
* 2011.02.01 - Tank Videos Part 1 & Part 2
* 2011.03.19 - Coral and Clam pr0n
* 2012.01.24 - King and Queen Angel pics
* 2012.01.28 - Sump deep cleaning fun.
* 2012.01.29 - Full Tank Shots
* 2012.10.19 - Fall Tank Update - Summer Coral Crash and Tank rehabilitation: Part 1 - Part 2 - Fish Photos .
* 2012.11.05 - Corals and Inverts: Part 1 - Part 2 - SPS Collection: Part 1 - Part 2 - Part 3 - Full Tank Shot.
* 2012.12.12.12:12 - Radion and Kessil 350W review.
* 2012.12.16 - GHL Mitras review.
* 2013.01.22 - Coral Macros and FTS
* 2013.02.19 - Clam Spawning - Clown spawning
* 2013.03.16 - Herbie to BeanAnimal Overflow Conversion.
* 2013.03.17 - Coral Photos Set 1 - Set 2
* 2013.06.22 - Calgary River Floods !!
* 2013.07.14 - Flood recovery update, 4 year review, photo spread. Set: 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9
* 2013.09.26 - The Reef Prayer Reactor
* 2013.09.27 - Fall photo spread. Set 1 - 2 - 3.
* 2013.10.01 - 1 Year growth sequence photos
================

Last edited by kien; 10-01-2013 at 10:34 PM.
Reply With Quote
  #2  
Old 07-08-2009, 12:44 PM
fishytime's Avatar
fishytime fishytime is offline
Member
 
Join Date: Mar 2007
Location: E-town
Posts: 5,390
fishytime will become famous soon enough
Default

And so it begins....
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694
Reply With Quote
  #3  
Old 07-08-2009, 02:32 PM
plutoniumJoe's Avatar
plutoniumJoe plutoniumJoe is offline
Member
 
Join Date: Oct 2008
Location: Vancouver
Posts: 283
plutoniumJoe is on a distinguished road
Default

Good luck to you and keep us posted. I love reading journals that start from concept and have plenty of pictures.
__________________
210 Gallon slowly gaining population.

Foxface, Naso, Coral Beauty, 2 Clowns, 2 Chromis, Orange Anthias, and Striped Goby.
Reply With Quote
  #4  
Old 07-08-2009, 06:02 PM
Malibu Malibu is offline
Member
 
Join Date: Jun 2009
Location: Red Deer, Alberta
Posts: 37
Malibu is on a distinguished road
Default

I see you are taking care to make sure your stand is level... is your floor level?

I am excited to see your new build, though, as I have just set up a room divider as well...
__________________
"you bought another fish?"
"... but honey, it looked at me!..."
Reply With Quote
  #5  
Old 07-08-2009, 06:06 PM
michika's Avatar
michika michika is offline
Member
 
Join Date: Nov 2004
Location: YYC
Posts: 5,063
michika is on a distinguished road
Default

Awe! Its another member of the V-Dub club!

I like where this is going!
__________________
+.-.+.-.+.-.+.-.+.-.+.-.+
I glue animals to rocks
Reply With Quote
  #6  
Old 07-08-2009, 08:16 PM
kien's Avatar
kien kien is offline
¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.¸¸. ><(((º>
 
Join Date: Apr 2009
Location: Calgary, AB
Posts: 7,665
kien will become famous soon enoughkien will become famous soon enough
Default

Quote:
Originally Posted by Malibu View Post
I see you are taking care to make sure your stand is level... is your floor level?

I am excited to see your new build, though, as I have just set up a room divider as well...
Oh man.. that floor is so not level. In fact, that orange level is no longer with us due to that fact. After taking that picture I went to lean on one of the corners. The stand rocked and sent the level flying 3 feet to its death I was using the level for measuring actually. I did haul the stand into the house to make sure it was level where it will finally sit and thankfully it is :-)

(mental note: next level I purchase is not going to be made of plastic).
Reply With Quote
  #7  
Old 07-08-2009, 08:49 PM
mseepman mseepman is offline
Gold Member
 
Join Date: Aug 2007
Location: Vernon
Posts: 2,529
mseepman is on a distinguished road
Default

Looking forward to this build as it's a smaller version of what I'm planning. When you say holes drilled in the eurobracing at the "opposite end" you mean opposite from the overflow. How do you plan to pipe the water to the other end without the pipes looking terrible?
__________________
Mark...



290g Peninsula Display, 425g total volume. Setup Jan 2013.
Reply With Quote
  #8  
Old 07-08-2009, 08:55 PM
kien's Avatar
kien kien is offline
¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.¸¸. ><(((º>
 
Join Date: Apr 2009
Location: Calgary, AB
Posts: 7,665
kien will become famous soon enoughkien will become famous soon enough
Default

Yes, the return outlets will be at the opposite end from the overflow box. I hope that works out because that is hellof-a-lot of travel :-)

The pipes are going to run up the side with the overflow box and then across the top of the tank along the long edge eurobrace until they meet up with the elbow and bulkhead at that opposite end. The tank is going to have a canopy to hide the pipes. Lights will sit on top of the canopy much like my current 90 gallon.

here is a highly detailed schematic of what I have planned. The red line is the return pipe. It will be 'T'ed off somewhere so that I can run one on either side of the long edge.



K.

Last edited by kien; 07-08-2009 at 09:05 PM.
Reply With Quote
  #9  
Old 07-08-2009, 11:11 PM
mseepman mseepman is offline
Gold Member
 
Join Date: Aug 2007
Location: Vernon
Posts: 2,529
mseepman is on a distinguished road
Default

So, I still have a bunch of questions just because this is so close to what I'm doing. What are you planning to run as your return pump? What are you planning to stock? Are you planning to use anything at the overflow end for flow? Lastly, are you planning a sand bed or a bare bottom?
__________________
Mark...



290g Peninsula Display, 425g total volume. Setup Jan 2013.
Reply With Quote
  #10  
Old 07-09-2009, 01:47 AM
kien's Avatar
kien kien is offline
¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.¸¸. ><(((º>
 
Join Date: Apr 2009
Location: Calgary, AB
Posts: 7,665
kien will become famous soon enoughkien will become famous soon enough
Default

Quote:
Originally Posted by mseepman View Post
So, I still have a bunch of questions just because this is so close to what I'm doing. What are you planning to run as your return pump? What are you planning to stock? Are you planning to use anything at the overflow end for flow? Lastly, are you planning a sand bed or a bare bottom?
I love questions about my setup so ask away! Makes me think about all the details that I sometimes neglect to think about :-)

Return pump will be a QuietOne 6000. I currently have a QuietOne 3000 and love how quiet it is.

At the overflow end I will reuse my two Koralias 2's for now. I will replace them with a Vortech MP40 by the end of the summer though (hopefully).

I had a deep sand bed (4") in my 90 gallon. When I moved it last weekend I kept the sand out of it because I planned on using the sand in the 150. After seeing the 90 for a few days now all bare bottom I have to say I am loving it. Thus I am going to go bare bottom for the 150 and will sell/give away my rubbermaid tub of live sand that's sitting in my living room :-) I'd like to cover the bottom of the 150 with maybe a sprinkling of sand, some zoas, green stars and mushrooms.

As for stocking, everything in my current 90 gallon is going to go into the 150. For fish I have a Blue/Regal/Hippo tang, yellow tang, pair of perculas, six line wrasse, flame angel, watchman goby, pair of chromis', lawnmower blenny and some inverts like shrimps, an urchin and hermit crabs. The only new addition I am planning is possibly a purple tang or powder blue.

Last edited by kien; 07-09-2009 at 01:49 AM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 02:54 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.