![]() |
#861
|
|||||
|
|||||
![]() Looks like it did the trick
I'm waiting for the lights to come on today to get an 'after' pic I also let it run past 48 hours - just over 60 |
#862
|
|||||
|
|||||
![]() As I mentioned earlier, I ran the Chemiclean for just over 60 hours - it's just how my schedule worked out
I dosed it Thursday night. As others have noted, nothing much was happening by Friday night (first 24 hours) Saturday afternoon I was able to blow pretty much all of the cyano off of everything Sunday afternoon I did some more blowing but mostly was down to LR cleaning now instead of a cyano battle ![]() Man that stuff traps a lot of crud in the rock. I still have to deal with what it's done to my sand -clumps of detritus Having a larger sized sump, I was able to perform a 25% WC without touching the DT water level As the skimmer is still going bananas on it's lowest setting, I'll do another 25% tomorrow night At that time I'll change the carbon again This is before I dosed ![]() This is today ![]() My LR hasn't looked this good since last summer ![]() ![]() ![]() |
#863
|
|||||
|
|||||
![]() Tonight I performed another 25% WC
The skimmer was still going balistic with the cup off, but it became better when I put the cup back on I let it run a few gallons out the drain and it's looking manageable for now. It's still turned down as far as it goes As far as Chemicleam goes; I'd do it again, but I wouldn't leave the skimmer running as it made a huge mess Next time I'd rather run an airstone in the DT and deal with a small amount of salt creep. The mess from the skimmer overflowing is a big headache to clean up Tomorrow night I will change the carbon again, and the tank will get a 10% WC Friday/Sat as part of my regular routine So, Monday I did a rescape that is not finished yet I'm very happy with how it's turning out, but can't post pics yet as it's not finished, so you'll just have to stay tuned ... ![]() |
#864
|
|||||
|
|||||
![]() I started rescaping the tank Feb 10th, but it's taken me this long to finish it
My reasons for the redo were to make more room for SPS I can see where things will grow now and hope my plans all come together If you look closely enough you'll see where I've remove many rocks from the tops of the burbs Before ![]() After ![]() Last edited by gregzz4; 02-17-2014 at 01:40 AM. |
#865
|
|||||
|
|||||
![]() The big green birdsnest colony takes up a lot of space
![]() |
#866
|
|||||
|
|||||
![]() Looks great,... and you have a plan!
You could have put that birdsnest even lower, if you wanted. I have a couple down near the bottom. One is even partially shaded, but both looking good there, and growing nicely. I initially had one higher, but found the color was better lower down.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem. |
#867
|
||||
|
||||
![]() Looking good Greg,
|
#868
|
|||||
|
|||||
![]() Quote:
I hope things turn out well after this change |
#869
|
|||||
|
|||||
![]() Looks awesome bud
![]() All those wrasse get along good? |
#870
|
|||||
|
|||||
![]() Thanks Bill
The wrasses tolerate each other, but there are some bullies |