Raied's Punyaquarium Build - Page 6

Dearth · #51 01-21-2016, 03:45 AM

Spoiling yourself rotten are you.....

mrhasan · #52 01-22-2016, 02:19 AM

Quote:

Originally Posted by Dearth

Spoiling yourself rotten are you.....

Etaloche · #53 01-22-2016, 03:10 AM

Quote:

Originally Posted by mrhasan

We're all guilty of this, don't be embarrassed

mrhasan · #54 02-06-2016, 09:52 PM

Finally I have been able to fill the tank after almost 2 months in decision making process

After failed attempt at making a stand, I ended up buying a biocube 29 stand. Looks good and works well and I got it at a nice discount, tanks to J&L.

2016-01-22 18.03.40 by M Raied Hasan, on Flickr

For power outlet, I bought an 8 outlet DJ power.

Here it was, sitting in its empty glorified form, waiting to be wet!

2016-01-22 19.40.54 by M Raied Hasan, on Flickr

And I just can't highlight how cute this thing is:

2016-01-22 17.57.02 by M Raied Hasan, on Flickr

Since I planned on not getting a controller and doing old school setup using timers (I am yet to start using it) and Ranco for temperature control, I finally got it, thanks to an LFS:

12656095_10153884869714808_255228969_o by M Raied Hasan, on Flickr

Wasn't pre-wired so had to do it by myself. The termination blocks are not the most user-friendly, especially considering how tight the inside of the enclosure is but I got it working without any hiccups.

2016-02-05 18.02.33 by M Raied Hasan, on Flickr

2016-02-05 18.33.33 by M Raied Hasan, on Flickr

Since I didn't have a stain relief handy, I made my own:

2016-02-05 18.36.17 by M Raied Hasan, on Flickr

Just a headsup: the probe is IP67 and is not meant to be submerged all the time. Although industrial devices are always underrated from what they can withstand, I heat shrink wrapped the joint between the wire and the rubber for added protection. It is better to be safe than sorry!

Did my best to get everything as "organized" as possible; not the most elegant way but its enough to make me happy and everything is hidden within the cabinet itself.

2016-02-04 21.15.22 by M Raied Hasan, on Flickr

2016-02-04 21.15.29 by M Raied Hasan, on Flickr

2016-02-04 21.15.36 by M Raied Hasan, on Flickr

Aquascaping was a bit of a pain since the rocks were of unique shapes so I had to stare at them for a long time to decide on this one:

2016-02-05 20.30.12 by M Raied Hasan, on Flickr

2016-02-05 20.30.24 by M Raied Hasan, on Flickr

2016-02-05 20.30.31 by M Raied Hasan, on Flickr

2016-02-05 20.30.53 by M Raied Hasan, on Flickr

And it was time to fill it up:

2016-02-05 20.38.19 by M Raied Hasan, on Flickr

And it lives......

2016-02-05 21.05.08 by M Raied Hasan, on Flickr

The water cleared up quite nicely within few hours but over night, it became a bit cloudy; not the one which would be of concern but it was a bit cloudy. Although I have been curing the rocks for 3 weeks now, I decided to add prodibio startup just for fun. And buying ammonia and nitrite test kit seemed like a waste of money to me.

For filter media, I am running chemipure elite and polyfilter. Will also add purigen for that extra kick of clarity. Skimmer seems to be quite loud but in reality, it is about 10 dB less than what curve 7 was. But since it is not inside a sump, the sound gets to my ears. Will probably take couple of weeks to calm down (that's what Aquamaxx said) of I can always get a bigger silencer .

I am getting my first livestocks for the tank tomorrow

Wish me luck!