lastlight's 97 (lights out)

[abcha0s]

The tank looks really nice. I guess that's one way of solving your heat issues

[lastlight]

Thanks guys!

Originally Posted by Funky_Fish14

What are your plans for finishing the stand?

Well since I'm not good with working with wood in the craftsman sense and I am in fact doing wood this time I'll make sure it looks good before I say! It wil be pretty simple tho: just skinning with 1/2" standard plywood, 2 or 3 inch ledge around the the tank's bottom (won't see bottom seam). The canopy will be joined to the stand with a rear portion that hides the rear seams. Basically the only seams showing with be the front two...sorta like a built-in. Plan to paint with a white/creamy colour.

FlamesFan's 25g tank/stand is my partial inspiration here but mine won't look 1/10th as nice!

http://www.canreef.com/vbulletin/showthread.php?t=67205

Originally Posted by zoaElite

WOW, like always Jay did a killer job. Can't wait to see that thing stocked Brett!

Yeah there isn't an edge not mitred and polished on the tank or sump. Even the bottom of the baffles have curved cuts it is pretty sweet.

Originally Posted by abcha0s

The tank looks really nice. I guess that's one way of solving your heat issues

Yeah I took that 'add more volume' advice to heart didn't I? I think this is it for upgrades while I'm living here tho as I'm not bothering with a basement reno while we're here. When I am in a house again though...gears will turn =)

[lastlight]

Well my SWC 160 came today. Super fast service by Oceanic Corals / SWC as it came a day earlier than even they said!

I have it running in my salt mixing bucket (with water/vinegar) which I guess I forgot to clean out. The brown film that is leftover after I do a waterchange is all boiling away on the surface of the head of foam after 5 min! So already I'm pleased and it's not even installed lol.

Anyone running this skimmer mind telling me what's up with the machined piece of white plastic that came inserted into the pump's intake end? It just loosely seats in there...I have it in right now.

[lastlight]

So I just finished filling the tank and sump. Was about to power on the eheim to give it a whirl. What's that sitting in the back of the sump? Oh it's just the Osmolator controller. I set it back there so the kids wouldn't touch it. It's underwater...oh bonus!

It wasn't turned on so I think I'll be able to save it. Full rinse in a bucket of ro/di and the cover is off and it's going to dry out for a few days before I check it out. I cursed pretty loudly and the wife thought the tank had a leak.

GRRR...

Good news is the tank and sump hold water and none of my bulkheads or pipes leak. Tank's still dead level too.

Oh I almost forgot...I tipped over my can of pvc glue (the grey crap) in the MIDDLE of the living room carpet last night. That was a 60 minute 'break' from plumbing. Miraculously you can barely see where it pooled but I deserve awards for the messes I make in my haste.

[Skimmerking]

Brett put it in a bag of Rice and seal the bag

[Doug]

Brett. I dumped mine in the middle of the vinyl floor.

Not sure what white pvc part you are referring to unless its the outlet from the pump to the outside of the skimmer? Great skimmer though. You going to love it. I think I may invest in one of those carbon caps though as it just reeks in my sump compartment. My wife gives me what for all the time.

[lastlight]

Originally Posted by Skimmer King

Brett put it in a bag of Rice and seal the bag

Oh good call I'll do that.

Originally Posted by Doug

Brett. I dumped mine in the middle of the vinyl floor.

Not sure what white pvc part you are referring to unless its the outlet from the pump to the outside of the skimmer? Great skimmer though. You going to love it. I think I may invest in one of those carbon caps though as it just reeks in my sump compartment. My wife gives me what for all the time.

My very first reef ever...I spilled the primer in the middle of a new lino floor. I spent about an hour shaving the top layer off of the floor wherever it had sprayed and then picked closest match pencil crayons from the arts cupboard and filled in the now white areas. My wife always wondered 'wtf' i guess when her feet would sorta run on that non-smooth area. I told her before we moved what had happened!

Yeah the skimmer test I did in bucket was awesome. I plugged it in in the sump today (i ahd taken out that machined white piece in the skimmer pump intake) and all it would do was fill with water and no air. i put it back in and you could tell it was working properly (even tho it's just fw).

[Doug]

Mine skimmed even in the laundry sink in fresh water with some vinegar.

[Delphinus]

When I was making the canopy for my old 72g bowfront I kicked over a can of white oil based paint on the carpet in the room I was working on. Turpentine and a shop vac (admittedly, probably not a great idea anyhow) at 1am. That was a classic "WTF are you doing" discussion with the wife.

Good luck with the controller. I would suspect it will be OK once it dries out.

When I was in Maui a few years ago, I would keep forgetting to take the car key fob out of my swim suit pocket before going snorkeling. At least 3 times that thing made it into the ocean, but it seemed to stay working... :redfaace:

[lastlight]

Yeah I hope you're right. Since the 34g is around the corner I decided not to try and connect my topoff bucket to it so I'm been manually doing it when I think to. I totally hate this and it's not stable either. I consider it an essential piece of equipment and I can't afford to replace it if it's gone bust-ville.

I think we've all had these mishaps haha. We should compile some sort of book. foreward by lance.